{"product_id":"value-collection-724-2167-roughing-end-mill-3-4-in-cobalt","title":"Value Collection 724-2167 Roughing End Mill 3\/4 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 724-2167 is a single-end cobalt roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel, it delivers heat and wear resistance needed when cutting tough ferrous and non-ferrous materials. The 3\/4 inch cutting diameter pairs with a 5\/8 inch shank and a 1.625 inch length of cut, making it well-suited for hogging operations where chip evacuation and tool rigidity matter. The bright, uncoated finish is standard for cobalt tooling used in general-purpose roughing. A licensed machinist or tooling professional installs and runs this end mill in a compatible milling machine or machining center.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for roughing passes in manual milling machines and CNC machining centers where high material removal rates are the priority. The 4-flute, right-hand cutting and right-hand flute configuration suits a wide range of shop applications including roughing steel, alloy steel, and similar materials. With an overall length of 3.75 inches and a 1.625 inch length of cut, it fits standard tool holders designed for 5\/8 inch shank tooling. It is not center-cutting, so it cannot plunge directly into material and must be ramped or edge-started.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for elevated heat resistance during high-feed roughing cuts\u003c\/li\u003e\n\u003cli\u003e3\/4 inch cutting diameter with 4 flutes for aggressive chip loads\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle use\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish — compatible with cutting oils and standard coolants\u003c\/li\u003e\n\u003cli\u003eSingle-end design with 5\/8 inch straight shank for rigid tool holder clamping\u003c\/li\u003e\n\u003cli\u003eNot center-cutting — requires ramp entry or edge starting; not suitable for direct plunge cuts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose roughing end mill for use in milling machines and machining centers that accept a 5\/8 inch shank end mill holder or collet.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's clamping and runout specifications. Power down and lock out the spindle before loading or removing the tool from the holder. Ensure the shank is fully seated and the tool holder is torqued to the machine manufacturer's specification. Because this end mill is not center-cutting, program ramp or helical entry moves rather than direct plunge paths to avoid tool damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.4 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 724-2167\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51720904016178,"sku":"724-2167","price":109.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d3cb766261f13a9150d984a3171b3263.jpg?v=1788570764","url":"https:\/\/voomisupply.com\/products\/value-collection-724-2167-roughing-end-mill-3-4-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}