{"product_id":"value-collection-724-1110-roughing-end-mill-1-2-in-cobalt","title":"Value Collection 724-1110 Roughing End Mill 1\/2 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 724-1110 is a single-end cobalt roughing end mill designed for aggressive material removal in milling applications. Built from M42 cobalt high-speed steel and finished with a TiN (titanium nitride) coating, this tool handles tough ferrous and non-ferrous materials with extended tool life. It features a 1\/2 inch cutting diameter, a 5\/8 inch length of cut, and a 2-5\/8 inch overall length. The 4-flute, right-hand cutting geometry delivers efficient chip evacuation and a stable cut under high feed rates. Center-cutting capability allows plunge entry without a pre-drilled pilot hole.\u003c\/p\u003e\u003cp\u003eThis roughing end mill is suited for manual knee mills, CNC machining centers, and bridgeport-style machines in job shop, toolroom, and production environments. It is a practical choice for roughing passes on steel, stainless, cast iron, and similar workpiece materials where material removal rate takes priority over surface finish. The 1\/2 inch shank seats directly in standard ER, Weldon, or collet-style toolholders without adapters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for heat and wear resistance in hard materials\u003c\/li\u003e\n\u003cli\u003eTiN coating extends tool life and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003eCenter-cutting design allows direct plunge entry into the workpiece\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle operation\u003c\/li\u003e\n\u003cli\u003e4 flutes provide a balance of chip clearance and edge strength for roughing passes\u003c\/li\u003e\n\u003cli\u003eMatched 1\/2 inch cutting and shank diameter simplifies toolholder selection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit tooling option for standard 1\/2 inch collet, ER collet, or Weldon flat-shank toolholders used on vertical milling machines and CNC machining centers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by a machinist or toolroom technician. Ensure the machine spindle is fully stopped and the control is in an e-stop or tool-change state before loading or unloading the end mill. Seat the shank fully into the toolholder and torque the retention mechanism to the toolholder manufacturer specification. Verify runout with a dial indicator before beginning a cut, as excessive runout accelerates edge wear and reduces surface quality.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/8 inch (0.6250 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 724-1110\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51693270991154,"sku":"724-1110","price":105.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/40f400cdd4426976bee6ef0f5515169a.jpg?v=1788309969","url":"https:\/\/voomisupply.com\/products\/value-collection-724-1110-roughing-end-mill-1-2-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}