{"product_id":"value-collection-724-0062-roughing-end-mill-11-32-in-cobalt","title":"Value Collection 724-0062 Roughing End Mill 11\/32 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 724-0062 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a bright, uncoated finish, this tool handles tough ferrous and non-ferrous materials where standard HSS tooling falls short. It measures 11\/32 inch (0.3438 inch decimal) in cutting diameter with a 3\/4 inch length of cut and a 3\/8 inch shank diameter. The overall length is 2-1\/2 inches. Three right-hand flutes with right-hand cutting direction provide efficient chip evacuation during roughing passes. Center-cutting geometry allows plunge entry when required.\u003c\/p\u003e\n\u003cp\u003eThis roughing end mill is suited for use in vertical mills, knee mills, and CNC machining centers in job shop, maintenance, and production environments. It is a practical choice for roughing operations on steel, stainless, cast iron, and similar materials where fast stock removal is the priority before a finishing pass. The 3\/8 inch shank fits standard ER collets, end mill holders, and Weldon-style side-lock holders common across most shop setups.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt steel construction for improved heat and wear resistance over standard M2 HSS\u003c\/li\u003e\n  \u003cli\u003e3 right-hand flutes with right-hand cutting direction for efficient chip clearance during roughing\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting design allows direct plunge entry without pre-drilling\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for use with cutting fluids and oils\u003c\/li\u003e\n  \u003cli\u003e3\/8 inch shank diameter fits widely available collet and holder systems\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with 3\/4 inch length of cut and 2-1\/2 inch overall length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard single-end roughing end mill with a 3\/8 inch shank, compatible with ER collet chucks, end mill holders, and side-lock holders sized for 3\/8 inch shank tooling on vertical mills and CNC machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists and toolroom technicians. Ensure the machine spindle is fully stopped and locked out before changing tooling. Seat the shank fully and evenly in the collet or holder and torque the retention nut or screw to the holder specification. Inspect the cutting edges for chipping before use, and apply appropriate cutting fluid for the workpiece material to extend tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (Fractional)\u003c\/strong\u003e: 11\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal)\u003c\/strong\u003e: 0.3438 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3\/4 inch (0.7500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 2-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Bright \/ Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 724-0062\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51698612797746,"sku":"724-0062","price":66.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0dae38a3e27e6620b16a856fe2c22d91.jpg?v=1788365438","url":"https:\/\/voomisupply.com\/products\/value-collection-724-0062-roughing-end-mill-11-32-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}