{"product_id":"value-collection-723-6796-roughing-end-mill-1-in-cobalt","title":"Value Collection 723-6796 Roughing End Mill 1 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 723-6796 is a single-end roughing end mill designed for aggressive material removal in milling applications. Built from M42 cobalt high-speed steel and finished with a TiN (titanium nitride) coating, this tool handles tough ferrous and non-ferrous materials with good wear resistance and heat tolerance. It features a 1-inch cutting diameter, 5 flutes for efficient chip evacuation, and a 3\/4-inch shank diameter. With a 3-inch length of cut and a 5-1\/4-inch overall length, it suits deep-pocket and slot milling passes where extended reach is not required. Right-hand cutting and right-hand flute direction are standard. This end mill is not center-cutting.\u003c\/p\u003e\n\u003cp\u003eThis roughing end mill is suited for use on vertical mills, knee mills, and CNC machining centers in job shop, production, and maintenance environments. Its 5-flute geometry and TiN coating make it appropriate for roughing passes in steel, stainless, and similar alloys where tool life and chip load per tooth matter. It is a single-end tool, meaning it is replaced rather than reversed when the cutting edge is worn.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-inch cutting diameter with 3-inch length of cut for deep-pocket roughing\u003c\/li\u003e\n  \u003cli\u003eM42 cobalt HSS construction for improved hot hardness and wear resistance over standard M2\u003c\/li\u003e\n  \u003cli\u003eTiN coating reduces friction and extends tool life in ferrous materials\u003c\/li\u003e\n  \u003cli\u003e5-flute design increases material removal rate compared to standard 4-flute geometry\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch shank diameter for secure collet or end mill holder retention\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute — compatible with standard CNC and manual spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard single-end roughing end mill with a 3\/4-inch shank, suitable for use in collet chucks, end mill holders, and Weldon-style tool holders configured for 3\/4-inch shanks on vertical mills and machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Ensure the machine spindle is fully stopped and locked out before inserting or removing the end mill from the holder. Verify shank seating depth and holder torque per the tool holder manufacturer's specifications. This tool is not center-cutting and should not be plunged directly into solid material without a pre-drilled entry point or ramping toolpath.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiN (Titanium Nitride)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 5.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-6796\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694876590386,"sku":"723-6796","price":213.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9bcb1332f68399cb3968d47b94f602a3.jpg?v=1788329322","url":"https:\/\/voomisupply.com\/products\/value-collection-723-6796-roughing-end-mill-1-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}