{"product_id":"value-collection-723-5910-roughing-end-mill-2in-8-flute-cobalt","title":"Value Collection 723-5910 Roughing End Mill 2in 8-flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 723-5910 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a bright, uncoated finish, it carries a 2-inch diameter with 8 flutes configured for right-hand cutting and right-hand flute direction. The 6-inch length of cut allows deep-reach roughing passes, while the 9-3\/4-inch overall length accommodates setups requiring extended tool engagement. This tool is intended for machinists and tooling professionals running heavy roughing operations on ferrous and non-ferrous materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill suits production and job-shop environments where high material removal rates are the priority over finish quality. Its cobalt M42 construction provides heat and wear resistance at elevated cutting speeds. The non-centercutting geometry means it is intended for peripheral milling and side-cutting applications, not plunge cutting. A 2-inch shank diameter matches standard collet and end mill holder setups used in vertical and horizontal machining centers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for elevated heat resistance and extended tool life in tough cuts\u003c\/li\u003e\n  \u003cli\u003e8-flute geometry maximizes chip load and material removal rate on roughing passes\u003c\/li\u003e\n  \u003cli\u003e6-inch length of cut supports deep-reach peripheral milling applications\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting and right-hand flute direction for standard spindle operation\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — ready to run or accept aftermarket coating\u003c\/li\u003e\n  \u003cli\u003eNon-centercutting design — optimized for side milling, not plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard end mill holders and collet chucks accepting a 2-inch shank diameter, compatible with vertical and horizontal machining centers running right-hand spindle rotation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's tooling guidelines. Secure the shank fully into the holder to the recommended engagement depth before tightening. Confirm spindle rotation direction matches the right-hand cutting geometry before running. Do not use this tool for plunge cutting — the non-centercutting geometry is not designed for axial entry.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-5910\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51716115005746,"sku":"723-5910","price":696.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/18b81250491031ea43d7af7acb5b5b24.jpg?v=1788521970","url":"https:\/\/voomisupply.com\/products\/value-collection-723-5910-roughing-end-mill-2in-8-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}