{"product_id":"value-collection-723-5835-roughing-end-mill-1-1-4-in-6-flute","title":"Value Collection 723-5835 Roughing End Mill 1-1\/4 in 6 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 723-5835 is a single-end roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a bright, uncoated finish, this tool handles tough ferrous and non-ferrous workpiece materials where standard HSS tooling falls short. The 1.25-inch diameter cutter features 6 flutes configured for a right-hand cutting direction and right-hand flute spiral. With a 2-inch length of cut and 4.5-inch overall length, it is suited for medium-depth roughing passes in vertical mills and CNC machining centers. Licensed machinists, tool-and-die makers, and production machinists are the primary users.\u003c\/p\u003e\n\u003cp\u003eThis roughing end mill is used in job shop and production environments for roughing slots, pockets, and profile cuts where chip clearance and tool rigidity are priorities. The 6-flute geometry distributes cutting load across more edges than standard 4-flute designs, reducing chatter on rigid setups. The 1-1\/4 inch shank diameter matches the cutter diameter, providing maximum rigidity in compatible end mill holders and collet chucks. It is not center-cutting, so it requires a pre-drilled or pre-milled entry point before plunging.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for improved heat and wear resistance over standard M2 HSS\u003c\/li\u003e\n  \u003cli\u003e6-flute design distributes cutting forces for reduced vibration on stable setups\u003c\/li\u003e\n  \u003cli\u003e1.25-inch diameter with matching 1.25-inch shank for maximum tool rigidity\u003c\/li\u003e\n  \u003cli\u003e2-inch length of cut suitable for medium-depth roughing passes\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand helix configuration standard for most vertical milling applications\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — compatible with regrinding and recoating services\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-geometry replacement roughing end mill for use in 1-1\/4 inch end mill holders, shell mill adapters with appropriate collets, or direct-mount tool holders accepting a 1.2500-inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists using an appropriate end mill holder or collet chuck rated for the 1.25-inch shank. Ensure the machine spindle is fully stopped and locked before loading or changing tooling. Verify holder runout with a dial indicator before cutting to avoid premature edge wear. Because this tool is not center-cutting, a pilot hole or side-entry approach is required at the start of any pocket operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.37 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-5835\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694980596018,"sku":"723-5835","price":122.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1f21d966d9deeb25e7dd034b29f66b3c.jpg?v=1788330162","url":"https:\/\/voomisupply.com\/products\/value-collection-723-5835-roughing-end-mill-1-1-4-in-6-flute","provider":"Voomi Supply","version":"1.0","type":"link"}