{"product_id":"value-collection-723-5767-roughing-end-mill-3-4-in-cobalt","title":"Value Collection 723-5767 Roughing End Mill 3\/4 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 723-5767 is a single-end roughing end mill designed for aggressive material removal in milling applications. Constructed from M42 cobalt high-speed steel, this 4-flute tool is built to handle tough ferrous and non-ferrous materials while maintaining edge integrity under heat. The 0.75-inch mill diameter pairs with a matching 0.75-inch shank diameter, providing rigid tool-to-holder engagement. With a 1.25-inch length of cut and 3.5-inch overall length, it suits standard vertical and horizontal milling setups. The bright, uncoated finish is typical for cobalt tooling used in general-purpose roughing passes where lubrication is applied at the cutting zone.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for shop environments requiring reliable stock removal on steel, stainless, and similar alloys. Its right-hand cutting and right-hand flute direction make it compatible with conventional milling spindle configurations. The non-centercutting geometry means it is intended for peripheral cuts and side milling rather than direct plunge entry. Machinists and toolroom operators running manual or CNC knee mills, bed mills, and machining centers will find this a standard roughing tool for pre-finishing passes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for improved heat and wear resistance over standard HSS\u003c\/li\u003e\n  \u003cli\u003e4-flute geometry balances chip clearance with rigidity during heavy cuts\u003c\/li\u003e\n  \u003cli\u003eSingle-end design with 0.75-inch diameter and 0.75-inch shank for consistent clamping\u003c\/li\u003e\n  \u003cli\u003e1.25-inch length of cut accommodates typical roughing depth requirements\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for use with cutting fluids and coolants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct substitute roughing end mill for standard 3\/4-inch collet chucks, end mill holders, and milling arbors used in vertical and horizontal milling machine setups.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Secure the shank fully within the holder to the recommended engagement depth before tightening to prevent pullout under load. Confirm spindle direction is set to right-hand rotation before operation. This tool is not center-cutting and must not be used for plunge entry cuts.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-5767\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51690170024242,"sku":"723-5767","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/058c4e3fea69c953d542f40f016ab0f4.jpg?v=1788266935","url":"https:\/\/voomisupply.com\/products\/value-collection-723-5767-roughing-end-mill-3-4-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}