{"product_id":"value-collection-723-5533-roughing-end-mill-1-in-5-flute-cobalt","title":"Value Collection 723-5533 Roughing End Mill 1 in 5 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 723-5533 is a single-end cobalt roughing end mill designed for aggressive material removal in milling operations. Built from M42 cobalt high-speed steel with a coarse pitch configuration, it handles interrupted cuts and heavy stock removal on ferrous and non-ferrous materials. The 1-inch diameter cutter carries 5 flutes and a bright, uncoated finish suited for applications where coating adhesion is not required. With a 2-inch length of cut and 4.5-inch overall length, it fits standard vertical and horizontal milling setups. Machinists and tool-and-die shops use this style of end mill to rough out profiles before finishing passes.\u003c\/p\u003e\u003cp\u003eThis roughing end mill is intended for use in manual knee mills, CNC machining centers, and similar setups requiring a 3\/4-inch shank. The coarse pitch geometry breaks chips aggressively, reducing heat buildup and cutting forces during deep passes in steel, stainless, cast iron, and similar materials. It is a single-end, right-hand cut, right-hand flute tool with no extended reach. It is not center-cutting, so it is not suited for direct plunge entry without a pre-drilled hole or ramp entry strategy.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt construction for heat and wear resistance in demanding milling applications\u003c\/li\u003e\n\u003cli\u003e5-flute, coarse pitch design for aggressive chip breaking and reduced cutting pressure\u003c\/li\u003e\n\u003cli\u003e1-inch milling diameter with a 3\/4-inch shank for compatibility with standard collets and end mill holders\u003c\/li\u003e\n\u003cli\u003e2-inch length of cut accommodates moderate-depth roughing passes\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish suitable for use with or without cutting fluid\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute geometry for standard spindle direction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard end mill holders and collet chucks accepting a 3\/4-inch shank diameter, compatible with most vertical knee mills and CNC machining centers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following shop safety procedures. Secure the shank fully in the holder to the recommended engagement depth and verify runout before cutting. This tool is not center-cutting and requires a pre-drilled hole or ramped entry for pocket operations. Always power down and lock out the spindle before changing tooling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M42\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Coarse\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-5533\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51720505688370,"sku":"723-5533","price":492.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/b6dfd8e5248c05b1bf75c90d7a636dab.jpg?v=1788565167","url":"https:\/\/voomisupply.com\/products\/value-collection-723-5533-roughing-end-mill-1-in-5-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}