{"product_id":"value-collection-723-2088-square-end-mill-1in-cobalt-2-flute","title":"Value Collection 723-2088 Square End Mill 1in Cobalt 2 Flute","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 723-2088 is a cobalt square end mill designed for material removal in ferrous metals, stainless steel, cast iron, and high-temperature alloys. It features a 1 inch mill diameter and a 1-5\/8 inch length of cut, making it well suited for slotting, profiling, and peripheral milling operations. The M42 cobalt construction provides heat resistance for tougher workpiece materials where standard high-speed steel falls short. With a 30-degree helix and two flutes, this end mill balances chip clearance and rigidity for demanding cuts. Machinists and tool-and-die professionals use this configuration for roughing and semi-finishing passes in steel and alloy materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill is a double-end design, delivering two usable cutting ends from a single tool to extend effective service life before replacement. The bright, uncoated finish is appropriate for applications where coating buildup could affect tolerances or where the operator prefers to run cutting lubricant. The 1 inch shank diameter fits standard collet and end mill holders in vertical machining centers, knee mills, and manual milling machines. It is center-cutting, allowing plunge entry directly into the workpiece where the operation requires it.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt construction for heat resistance in ferrous and high-temp alloy cutting\u003c\/li\u003e\n  \u003cli\u003eDouble-end design provides two cutting ends per tool\u003c\/li\u003e\n  \u003cli\u003eCenter-cutting geometry allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle balances chip evacuation and cutting stability\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute spiral for standard spindle compatibility\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suits wet cutting and precision-tolerance applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard 1 inch end mill holders, collet chucks, and hydraulic tool holders on vertical machining centers, knee mills, and manual milling machines. Rated for primary workpiece materials including steel, stainless steel, cast iron, and high-temperature alloys.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer torque and runout specifications for the toolholder in use. Ensure the spindle is fully stopped and the machine is locked out before loading or removing the end mill from the holder. Verify holder concentricity and seating depth before the first cut to minimize runout. Use appropriate cutting fluid or coolant for the workpiece material to maximize tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1-5\/8 inches (1.6250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5-7\/8 inches (5.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, High-Temp Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VCCCDE-C-2-30H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1.43 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-2088\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51696815112498,"sku":"723-2088","price":137.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ece7ad237d5b00cfbbb48d911d4a78f8.jpg?v=1788346567","url":"https:\/\/voomisupply.com\/products\/value-collection-723-2088-square-end-mill-1in-cobalt-2-flute","provider":"Voomi Supply","version":"1.0","type":"link"}