{"product_id":"value-collection-723-1610-cobalt-square-end-mill-7-64-in","title":"Value Collection 723-1610 Cobalt Square End Mill 7\/64 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 723-1610 is a double-end cobalt square end mill designed for precision milling in demanding metalworking applications. Built from M42 cobalt high-speed steel, this stub-length tool features a 7\/64 inch (0.1094 inch) cutting diameter and a 5\/32 inch (0.1563 inch) length of cut. With 2 flutes and a 30-degree right-hand spiral helix, it delivers efficient chip evacuation and clean edge geometry. Center-cutting capability allows plunge entry as well as peripheral milling. The bright\/uncoated finish suits general-purpose use across a range of ferrous workpiece materials. Machinists, tool-and-die workers, and CNC operators working in job shops and manufacturing environments are the primary users.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for milling operations on steel, stainless steel, cast iron, and high-temperature alloys. Its stub-length profile provides rigidity in tight-clearance setups where deflection must be minimized. The double-end design doubles usable tool life, making it a practical choice for production environments. The 3\/16 inch shank diameter fits standard collets and end mill holders commonly found on vertical mills and CNC machining centers. Typical applications include slotting, profiling, and light pocketing at small diameters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt steel construction for heat and wear resistance in ferrous materials\u003c\/li\u003e\n\u003cli\u003eDouble-end design provides two usable cutting ends per tool\u003c\/li\u003e\n\u003cli\u003eCenter-cutting geometry allows direct plunge milling\u003c\/li\u003e\n\u003cli\u003e30-degree right-hand helix promotes smooth chip flow and reduced cutting forces\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish compatible with a wide range of cutting fluids and dry cutting setups\u003c\/li\u003e\n\u003cli\u003eStub-length body increases rigidity and reduces deflection at small diameters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard collet chucks and end mill holders accepting a 3\/16 inch shank. Suitable for milling steel, stainless steel, cast iron, and high-temperature alloys (ISO material codes P, M, K, S).\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes should be performed by a qualified machinist with the spindle fully stopped and the machine locked out per standard shop safety procedures. Ensure the shank is clean and the collet or holder is properly torqued before operation. Do not exceed the tool manufacturer's recommended speeds and feeds for the workpiece material and depth of cut. Inspect the cutting edges before each use; a double-end tool should be flipped only when the active end shows wear, not damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/64 inch (0.1094 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 5\/32 inch (0.1563 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Stub\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, High-Temp Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VCCCDE-C-2-30H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 723-1610\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51698330304818,"sku":"723-1610","price":22.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/92f676f1f0ec405eaa9ab6f4fe02ee60.jpg?v=1788361242","url":"https:\/\/voomisupply.com\/products\/value-collection-723-1610-cobalt-square-end-mill-7-64-in","provider":"Voomi Supply","version":"1.0","type":"link"}