{"product_id":"value-collection-720-9130-square-end-mill-2-flute-hss","title":"Value Collection 720-9130 Square End Mill 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 720-9130 is a single-end square end mill designed for material removal and profiling operations on a milling machine or machining center. Built from M2 high speed steel with a bright uncoated finish, this tool features a 0.5118-inch cutting diameter, a 1.125-inch length of cut, and a 0.500-inch shank diameter. The two-flute configuration provides efficient chip evacuation and is well suited for slotting, peripheral milling, and plunge cutting. A right-hand cut with right-hand spiral flutes and a 30-degree helix angle produces clean, consistent cuts across a range of common workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill is intended for use on manual mills and CNC machining centers in job shop, maintenance, and production environments. It is centercutting, which allows direct plunge entry into a workpiece without a pre-drilled pilot hole. Typical applications include profiling, contouring, and slotting operations in steel, stainless steel, cast iron, and aluminum and non-ferrous materials. The 3.125-inch overall length provides adequate reach for standard depth setups without sacrificing rigidity.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM2 high speed steel construction for toughness and wear resistance across a range of materials\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for aluminum and non-ferrous applications as well as general-purpose steel cutting\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pilot hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with right-hand spiral flutes for smooth chip flow\u003c\/li\u003e\n  \u003cli\u003eTwo-flute design provides large chip gullets for efficient evacuation in slotting operations\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with a standard 0.500-inch shank for compatibility with common collets and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose single-end square end mill with a 0.500-inch shank diameter, fitting standard ER, R8, and straight-bore end mill holders commonly used on vertical milling machines and CNC machining centers.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following standard toolholding procedures. Ensure the machine spindle is fully stopped and the tool holder is clean and free of chips before securing the shank. Follow the tool holder manufacturer's torque recommendations when tightening collet nuts or set screws. Do not exceed the tool's rated cutting parameters for the workpiece material being machined.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5118 inches (13.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.125 inches (1-1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.500 inches (1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.125 inches (3-1\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel, M2 grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VCCC-HSS-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.016 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-9130\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51714329346354,"sku":"720-9130","price":39.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/db82b569863fe3364b15820ba3641aa0.jpg?v=1788499602","url":"https:\/\/voomisupply.com\/products\/value-collection-720-9130-square-end-mill-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}