{"product_id":"value-collection-720-9090-square-end-mill-2-flute-hss","title":"Value Collection 720-9090 Square End Mill 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 720-9090 is a single-end, two-flute square end mill manufactured from M2 high speed steel (HSS). Designed for general-purpose milling operations, it features a 0.3543-inch cutting diameter, a 9\/16-inch length of cut, and a 3\/8-inch straight shank. The bright, uncoated finish reflects the base M2 steel with no additional coating treatment. At 2-5\/16 inches overall length, this end mill suits standard toolholders and milling chucks in both manual and CNC machining environments. The right-hand cut and right-hand spiral flute geometry with a 30-degree helix angle promotes efficient chip evacuation and stable cutting performance across a range of workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for slotting, profiling, and peripheral milling operations on steel, stainless steel, cast iron, and aluminum and non-ferrous materials. The centercutting design allows for plunge entry as well as standard side milling cuts. It is a practical general-purpose choice for job shop work, toolroom applications, and maintenance machining where an uncoated HSS tool is preferred over carbide or coated alternatives.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM2 high speed steel construction for toughness across a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e0.3543-inch (9.00 mm) cutting diameter with a 9\/16-inch length of cut\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry permits direct plunge entry without a pre-drilled pilot hole\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle with right-hand cut and right-hand spiral flute for efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish  -  suitable for applications where coating is not required or not preferred\u003c\/li\u003e\n  \u003cli\u003eSingle-end design; 3\/8-inch shank diameter fits standard collets and end mill holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard single-end square end mill for use in milling machines, machining centers, and CNC routers accepting a 3\/8-inch shank. Compatible with workpiece materials including steel, stainless steel, cast iron, and aluminum and non-ferrous metals.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following standard toolholding procedures. Ensure the machine spindle is fully stopped and the tool holder is clean and free of debris before inserting the shank. Clamp the shank to the minimum recommended insertion depth specified by the toolholder manufacturer to prevent pullout under load. Verify spindle RPM and feed rate are appropriate for the workpiece material and cutting diameter before beginning the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (Decimal Inch)\u003c\/strong\u003e: 0.3543 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter (mm)\u003c\/strong\u003e: 9.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel (M2)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 9\/16 inch (0.5625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inch (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-5\/16 inches (2.3125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VCCC-HSS-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.008 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-9090\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":67950480490802,"sku":"720-9090","price":30.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/963c911833040be1a9b7dd750ae216e9.jpg?v=1791719152","url":"https:\/\/voomisupply.com\/products\/value-collection-720-9090-square-end-mill-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}