{"product_id":"value-collection-720-3127-square-end-mill-6-flute-hss","title":"Value Collection 720-3127 Square End Mill 6 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 720-3127 is a single-end square end mill manufactured from M2 high speed steel with a bright\/uncoated finish. It features a 1.3125-inch cutting diameter, a 2-inch length of cut, and six spiral flutes with a 30-degree helix angle. The right-hand cutting direction and right-hand flute geometry make it suited for conventional milling operations on ferrous and non-ferrous materials. With a 0.75-inch shank diameter and 4.5-inch overall length, this is a regular-length tool intended for machining centers and manual mills. Machinists and tool-and-die professionals install this type of cutter for profiling, slotting, and peripheral milling work.\u003c\/p\u003e\n\u003cp\u003eThis end mill is designed for general-purpose material removal on a wide range of workpiece materials where HSS tooling is appropriate. The six-flute configuration provides a higher feed-per-tooth capability compared to four-flute designs at equivalent RPM, making it well suited for finishing passes and light to moderate stock removal in ferrous alloys, aluminum, and plastics. The bright\/uncoated surface is compatible with most cutting fluids and straight oils.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM2 high speed steel construction for toughness and re-sharpenability\u003c\/li\u003e\n  \u003cli\u003eSix spiral flutes at 30-degree helix angle for smooth chip evacuation\u003c\/li\u003e\n  \u003cli\u003e1.3125-inch (1-5\/16 inch) cutting diameter, 2-inch length of cut\u003c\/li\u003e\n  \u003cli\u003e0.75-inch (3\/4 inch) shank diameter fits standard ER and side-lock holders\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, right-hand flute, single-end configuration\u003c\/li\u003e\n  \u003cli\u003eBright\/uncoated finish compatible with water-soluble and oil-based cutting fluids\u003c\/li\u003e\n  \u003cli\u003eNot center-cutting — not intended for direct plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling option for milling machines and machining centers accepting a 0.75-inch shank diameter end mill holder.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis end mill is installed by a machinist or toolroom professional into a compatible end mill holder or collet chuck rated for the 0.75-inch shank. Ensure the spindle is fully stopped and the machine is powered down or in a locked-out state before changing tooling. Confirm holder runout with a dial indicator before cutting, as excess runout accelerates wear on a six-flute tool. Because this tool is not center-cutting, use a ramp or helical entry path rather than direct axial plunge when starting a pocket.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1.3125 inches (1-5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches (3\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VC-HSS-6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.94 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-3127\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694573289778,"sku":"720-3127","price":168.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7e497f094396968d22ad22fa8e3f508f.jpg?v=1788325657","url":"https:\/\/voomisupply.com\/products\/value-collection-720-3127-square-end-mill-6-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}