{"product_id":"value-collection-720-2165-ball-end-mill-3-8-in-2-flute-hss","title":"Value Collection 720-2165 Ball End Mill 3\/8 in 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 720-2165 is a double-end ball end mill designed for milling contoured surfaces, slots, pockets, and three-dimensional profiles in a machine shop environment. Built from M2 high speed steel with a bright, uncoated finish, this tool measures 3\/8 inches in diameter with a 9\/16-inch length of cut and a 3-1\/8-inch overall length. The double-end design extends tool life by providing two usable cutting ends. A 30-degree helix angle and two right-hand spiral flutes promote smooth chip evacuation and reduced cutting force. Machinists and CNC operators working in job shops or production environments typically run this tool on vertical machining centers and manual knee mills.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for general-purpose milling operations on ferrous and non-ferrous materials at moderate cutting speeds. The 3\/8-inch shank diameter fits standard collets and end mill holders. The bright, uncoated surface finish makes this tool a cost-effective option for shops machining aluminum, mild steel, and similar materials where specialized coatings are not required. It is a standard-length tool appropriate for setups without deep-reach requirements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eDouble-end design provides two cutting ends, extending usable tool life\u003c\/li\u003e\n  \u003cli\u003eM2 high speed steel construction offers good toughness and wear resistance for general milling\u003c\/li\u003e\n  \u003cli\u003e30-degree right-hand helix promotes efficient chip evacuation and smooth cutting action\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suits aluminum, mild steel, and other general-purpose work materials\u003c\/li\u003e\n  \u003cli\u003eTwo right-hand spiral flutes for balanced cutting at standard feed rates\u003c\/li\u003e\n  \u003cli\u003eStandard-length configuration fits common collet and end mill holder setups without extended reach\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-fitment replacement or addition for machining centers, CNC mills, and manual knee mills accepting a 3\/8-inch shank end mill holder or collet.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist or CNC operator. Before inserting or removing any end mill, confirm the spindle is fully stopped and the machine is powered down or in an e-stop state. Seat the shank fully into the collet or end mill holder and torque the retention hardware according to the toolholder manufacturer specifications. Inspect the cutting edges for chips or damage before each use and replace the tool if either end shows wear beyond acceptable limits.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 3\/8 inches (0.3750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 9\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.25 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-2165\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51720762982706,"sku":"720-2165","price":75.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e03d0a66a4f3c55cac1f29c988e201c4.jpg?v=1788568789","url":"https:\/\/voomisupply.com\/products\/value-collection-720-2165-ball-end-mill-3-8-in-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}