{"product_id":"value-collection-720-1636-square-end-mill-5-64in-2-flute-hss","title":"Value Collection 720-1636 Square End Mill 5\/64in 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 720-1636 is a double-end, two-flute square end mill designed for general-purpose milling operations in metal fabrication and machining environments. Manufactured from M2 high speed steel with a bright\/uncoated finish, it measures 0.0781 inches (5\/64 inches) in cutting diameter with a 0.2344-inch (15\/64 inches) length of cut. The 3\/16-inch shank diameter and 2.25-inch overall length make this a compact tool suited for light profiling, slotting, and contouring passes. A 30-degree helix angle promotes chip evacuation, and the centercutting geometry allows plunge entry. This tool is typically installed by machinists and CNC operators working on manual mills or machining centers.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use on steel, stainless steel, cast iron, and high-temperature alloys, covering ISO material groups P, M, K, and S. The double-end configuration provides two usable cutting ends, extending service life before replacement. Typical applications include light slotting, peripheral milling, and profiling on small workpieces or in tight clearance areas where a sub-1\/8-inch diameter tool is required. Right-hand cut and right-hand flute direction are standard for conventional spindle rotation on most milling equipment.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDouble-end design yields two cutting ends per tool, reducing per-cut tooling cost\u003c\/li\u003e\n\u003cli\u003eM2 high speed steel construction offers good toughness and wear resistance across a range of ferrous materials\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip evacuation in slotting and profiling cuts\u003c\/li\u003e\n\u003cli\u003eCentercutting capability allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n\u003cli\u003eBright\/uncoated finish is compatible with cutting fluids and standard lubricants without coating degradation concerns\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand spiral flute for use with standard CNC and manual milling spindles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard fractional-inch shank end mill compatible with collet chucks, end mill holders, and milling chucks accepting a 3\/16-inch shank diameter on manual knee mills and CNC machining centers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the equipment manufacturer's toolholding specifications. Ensure the spindle is fully stopped and the machine is in a safe, locked-out state before changing tooling. Secure the shank to the full recommended engagement depth in the collet or tool holder to prevent pullout under cutting loads. Verify runout with a dial indicator after seating when tight tolerances are required.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 5\/64 inches (0.0781 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 15\/64 inches (0.2344 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel (M2 grade)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, High-Temp Alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Fractional Inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-1636\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51710306812210,"sku":"720-1636","price":34.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/aeb4bcf9b824d37fa80b946dfd7333af.jpg?v=1788465391","url":"https:\/\/voomisupply.com\/products\/value-collection-720-1636-square-end-mill-5-64in-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}