{"product_id":"value-collection-720-1445-ball-end-mill-2in-2-flute-hss","title":"Value Collection 720-1445 Ball End Mill 2in 2 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 720-1445 is a single-end ball end mill designed for contour milling, slotting, and profiling operations in ferrous and non-ferrous materials. Built from M2 high speed steel with a bright uncoated finish, it delivers reliable cutting performance in general-purpose machining applications. The 2-inch mill diameter and 2-flute right-hand spiral geometry provide efficient chip evacuation and smooth surface finishes on curved and three-dimensional profiles. With a 2.5-inch length of cut and 5-inch overall length, this tool is suited for moderate-depth milling passes where reach and rigidity are both important. Machinists and tooling professionals install this end mill on vertical machining centers and manual mills.\u003c\/p\u003e\n\u003cp\u003eThis ball end mill is used in job shop, production, and maintenance machining environments where radius-bottom features, die cavities, and sculpted surfaces are required. The 1.25-inch shank diameter provides a secure grip in standard end mill holders and collet chucks. Right-hand cutting direction and spiral flutes make it compatible with conventional climb-milling setups on most CNC and manual equipment. It ships as a single-piece unit and is appropriate for use in metalworking facilities operating under standard OSHA machine-guarding requirements.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2-inch ball nose diameter for profiling radius and contour features\u003c\/li\u003e\n  \u003cli\u003eM2 high speed steel construction for toughness and re-sharpenability\u003c\/li\u003e\n  \u003cli\u003e2-flute right-hand spiral design promotes chip evacuation in slotting and profiling cuts\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for general-purpose and regrindable tooling programs\u003c\/li\u003e\n  \u003cli\u003eSingle-end configuration with 1.25-inch shank diameter for rigid tool holding\u003c\/li\u003e\n  \u003cli\u003eStandard length geometry balances reach and deflection resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose replacement or stock end mill for vertical machining centers, knee mills, and CNC routers accepting a 1.25-inch shank in standard end mill holders or collet chucks.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. The machine spindle must be powered down and locked out before inserting or removing the tool from the holder. Ensure the shank is fully seated to the recommended engagement depth in the holder and that all set screws or collet nuts are torqued according to the toolholder manufacturer specifications. Inspect the cutting edges for chips or damage before each use and replace the tool if any defects are observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.26 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-1445\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51692187025714,"sku":"720-1445","price":297.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/646f01030a9401b6e6cab2176ffe89c4.jpg?v=1788294292","url":"https:\/\/voomisupply.com\/products\/value-collection-720-1445-ball-end-mill-2in-2-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}