{"product_id":"value-collection-720-1083-square-end-mill-7-8-in-hss","title":"Value Collection 720-1083 Square End Mill 7\/8 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 720-1083 is a single-end, square-profile end mill designed for material removal in milling operations on machining centers and manual mills. Manufactured from M2 high speed steel with a bright uncoated finish, it runs a 0.875-inch cutting diameter across a 1.5-inch length of cut. The 2-flute geometry and 30-degree right-hand spiral helix provide efficient chip evacuation and a balance between rigidity and cutting clearance. The centercutting design allows plunge entry directly into the workpiece. This tool is installed and operated by machinists and tool-and-die professionals in job shop and production environments.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for milling steel, stainless steel, cast iron, and aluminum and non-ferrous materials. With a 0.625-inch shank diameter and a 3.625-inch overall length, it fits standard ER and collet-style toolholders commonly found on vertical and horizontal machining centers as well as Bridgeport-style knee mills. The regular-length configuration keeps deflection low during side milling, slotting, and profiling operations at moderate depths of cut.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM2 high speed steel construction for toughness across a wide range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e0.875-inch cutting diameter with 1.5-inch length of cut for standard-depth milling passes\u003c\/li\u003e\n  \u003cli\u003e2-flute, 30-degree right-hand spiral helix for efficient chip flow and reduced heat buildup\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pre-drilled hole\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish suitable for use with or without cutting fluid\u003c\/li\u003e\n  \u003cli\u003eSingle-end design; right-hand cut and right-hand flute direction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard fractional-inch single-end square end mill with a 0.625-inch shank, compatible with collet chucks, ER-style holders, and end mill holders sized for that shank diameter on vertical or horizontal milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified machinist. Ensure the machine spindle is fully stopped and the tool holder is clean and free of chips before seating the shank. Tighten the collet or set screw to the toolholder manufacturer's specified torque using the appropriate wrench. Verify runout with a dial indicator before initiating a cut, and confirm that feed rate and spindle speed are appropriate for the workpiece material and depth of cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.875 inches (7\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches (1-1\/2 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.625 inches (3-5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel, Grade M2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Single\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Aluminum and Non-Ferrous\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: VCCC-HSS-2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.042 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 720-1083\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51689553592626,"sku":"720-1083","price":78.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5a6e0e087606dbc3ea7d4456d9d16ae3.jpg?v=1788261266","url":"https:\/\/voomisupply.com\/products\/value-collection-720-1083-square-end-mill-7-8-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}