{"product_id":"value-collection-548459ps-dowel-pin-12x35mm-alloy-steel","title":"Value Collection 548459PS Dowel Pin 12x35mm Alloy Steel","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 548459PS is a flat vent pull out dowel pin manufactured from alloy steel to DIN 7979D standards. It measures 12 mm in diameter and 35 mm in overall length, with one rounded end and one threaded end for extraction. The pin carries a hardness rating of 57-63 HRC, making it suited for precision locating and alignment applications in tooling, dies, and machined assemblies. Machinists, toolmakers, and maintenance technicians working with jigs, fixtures, or mold tooling are the primary installers of this type of component.\u003c\/p\u003e\n\u003cp\u003eThis dowel pin is used wherever accurate, repeatable part location is required in industrial and manufacturing environments. Its flat vent design allows trapped air and lubricant to escape during press-fit installation, reducing hydraulic lock in blind holes. The threaded end facilitates removal with a standard extraction tool without damaging the bore or surrounding material. Typical applications include fixture plates, die sets, mold bases, and precision machined assemblies requiring tight positional tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFlat vent groove allows air and oil to escape during press-fit installation, preventing hydraulic lock\u003c\/li\u003e\n  \u003cli\u003eOne threaded end enables clean extraction without bore damage\u003c\/li\u003e\n  \u003cli\u003e57-63 HRC hardness provides wear resistance in high-cycle locating applications\u003c\/li\u003e\n  \u003cli\u003eManufactured to DIN 7979D standard for dimensional consistency\u003c\/li\u003e\n  \u003cli\u003eAlloy steel construction for strength and durability in tooling environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a DIN 7979D-standard flat vent pull out dowel pin for use in tooling, fixture, and precision machined assemblies that require a 12 mm nominal diameter locating pin.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is typically performed by machinists or toolroom technicians using a press or mallet with an appropriate driver. Ensure the receiving bore is clean, properly toleranced, and aligned before pressing the pin into place. The flat vent groove must face the bore wall to allow fluid and air to vent. Always use the threaded extraction feature and a proper puller for removal rather than driving the pin out from the threaded end.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePin Type\u003c\/strong\u003e: Flat Vent Pull Out\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter\u003c\/strong\u003e: 12 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 35 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Alloy Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 57-63 HRC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: One Rounded, One Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standard\u003c\/strong\u003e: DIN 7979D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.35 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 548459PS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51720275427634,"sku":"548459PS","price":16.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/45b53b728e32e0082cc4860f83001c7b.jpg?v=1788562112","url":"https:\/\/voomisupply.com\/products\/value-collection-548459ps-dowel-pin-12x35mm-alloy-steel","provider":"Voomi Supply","version":"1.0","type":"link"}