{"product_id":"value-collection-383-8816-tre-6-single-point-boring-tool-bit","title":"Value Collection 383-8816 TRE-6 Single-point Boring Tool Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 383-8816 is a single-point tool bit designed for round shank boring applications. Built to the TRE-6 industry standard, it features a C6 solid carbide tip brazed to a neutral cutting geometry with a 15-degree lead angle. The 1\/64 inch nose radius produces a fine finish on bored surfaces. With a 3\/8 inch square shank and 1-3\/4 inch overall length, this compact bit fits standard boring bars used in lathe and machining center setups. Machinists and tool-and-die professionals install this type of bit for internal diameter boring on ferrous metals and harder non-ferrous alloys where carbide grade C6 is the appropriate choice.\u003c\/p\u003e\n\u003cp\u003eThis tool bit is suited for internal boring operations on manual lathes, CNC lathes, and boring mills. The TRE-style round shank geometry is a widely used industry-standard configuration for boring bar holders. The neutral cutting direction means the bit does not favor a left-hand or right-hand feed, making it adaptable across a range of boring setups. Typical applications include enlarging, truing, and finishing drilled or cast holes in production and job-shop environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eC6 solid carbide tip for hardness and wear resistance in boring operations\u003c\/li\u003e\n  \u003cli\u003eTRE-6 industry standard configuration for compatibility with standard boring bar holders\u003c\/li\u003e\n  \u003cli\u003eNeutral cutting direction for flexible feed orientation\u003c\/li\u003e\n  \u003cli\u003e15-degree lead angle reduces cutting forces and aids chip flow\u003c\/li\u003e\n  \u003cli\u003e1\/64 inch nose radius for improved surface finish on bored diameters\u003c\/li\u003e\n  \u003cli\u003eCompact 1-3\/4 inch overall length suits tight boring bar setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct substitute for TRE-6 industry-standard single-point boring tool bit holders with a 3\/8 inch round shank bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician. The machine spindle must be fully stopped and locked out before inserting or changing tool bits in a boring bar holder. Secure the shank firmly in the holder to the manufacturer-specified clamping requirements to prevent tool pull-out during the cut. Inspect the carbide tip for chips or cracks before each use and replace the bit if any damage is observed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: TRE-6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: TRE\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Type\u003c\/strong\u003e: Round Shank Boring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Boring\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width \/ Diameter\u003c\/strong\u003e: 3\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-3\/4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 1\/64 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 15 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material Grade\u003c\/strong\u003e: C6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112800\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 383-8816\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51715074425138,"sku":"383-8816","price":46.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/72131386c36fff5838b35ccad0bee73e.jpg?v=1788509521","url":"https:\/\/voomisupply.com\/products\/value-collection-383-8816-tre-6-single-point-boring-tool-bit","provider":"Voomi Supply","version":"1.0","type":"link"}