{"product_id":"value-collection-383-8236-gr-12-single-point-tool-bit","title":"Value Collection 383-8236 GR-12 Single-point Tool Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 383-8236 is a GR-style single-point tool bit designed for turning and facing operations on manual and CNC lathes. It features a solid carbide tip grade C6, which provides the hardness and wear resistance needed for cutting ferrous and non-ferrous metals at sustained feeds and speeds. The shank measures 3\/4 inches in both height and width, and the overall length is 4.5 inches. The right-hand cutting direction and offset end-cutting geometry make this bit suitable for turning toward the chuck and facing to a shoulder. Machinists and toolroom operators install this bit directly into a tool post or boring bar holder.\u003c\/p\u003e\u003cp\u003eThis tool bit is configured for turning and facing applications where the tool must work close to a chuck jaw or cut to a shoulder without clearance issues. The GR-12 style designation identifies the geometry per industry-standard classification. A 1\/32-inch nose radius provides a balance between surface finish quality and edge strength during general-purpose turning operations. It is commonly used in job shops, production machining environments, and maintenance machine shops on steel, cast iron, and similar materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGR-style offset end-cutting geometry for turning and facing to shoulder\u003c\/li\u003e\n\u003cli\u003eC6 solid carbide tip grade for wear resistance on ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003e3\/4 inch x 3\/4 inch shank cross-section fits standard tool post holders\u003c\/li\u003e\n\u003cli\u003e1\/32 inch nose radius balances surface finish and edge durability\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction for standard lathe approach\u003c\/li\u003e\n\u003cli\u003e4.5 inch overall length for reach in typical tool post setups\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-fit tool bit for standard tool post holders and indexable tool holders accepting a 3\/4 inch square shank with GR-12 industry-standard geometry.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool bit is installed and set by a machinist or toolroom technician. Secure the shank firmly in the tool post holder to the manufacturer-specified clamping torque for the holder being used. Ensure the cutting edge is set to the correct center height relative to the workpiece before beginning a cut. Inspect the carbide tip for cracks or chipping before each use and replace the bit if the tip is damaged.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: GR-12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: GR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Bit Type\u003c\/strong\u003e: Offset End Cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 3\/4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 1\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material Grade\u003c\/strong\u003e: C6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Turning and Facing to Shoulder, Work Close to Chuck Jaw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112800\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 383-8236\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51705328992562,"sku":"383-8236","price":54.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76b20c9b65a1935676177a0e27311c39.jpg?v=1788428289","url":"https:\/\/voomisupply.com\/products\/value-collection-383-8236-gr-12-single-point-tool-bit","provider":"Voomi Supply","version":"1.0","type":"link"}