{"product_id":"value-collection-383-8132-single-point-tool-bit-fl-c2-carbide","title":"Value Collection 383-8132 Single-point Tool Bit Fl C2 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 383-8132 is a single-point tool bit designed for metal turning operations on manual and CNC lathes. It features an FL-style offset end cutting geometry with a solid C2 carbide tip, making it well suited for high-speed steel replacement applications where hardness and wear resistance are priorities. The 1 inch shank height and 1 inch shank width fit standard tool holders in that size class. With a 7 inch overall length and a 1\/32 inch nose radius, this bit delivers controlled surface finish on ferrous and non-ferrous workpieces. Installation and use are performed by machinists and toolroom technicians.\u003c\/p\u003e\n\u003cp\u003eThis tool bit is configured for left-hand cutting direction and is optimized for turning and facing to shoulder operations as well as work performed close to the chuck jaw. These are common requirements in production turning cells and job shop environments where clearance around fixturing is limited. The FL-16 industry standard number identifies the shank size and style for straightforward replacement sourcing against catalog specifications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFL-style offset end cutting geometry for shoulder turning and close-to-chuck work\u003c\/li\u003e\n  \u003cli\u003eSolid C2 carbide tip grade for durability on general-purpose turning and facing\u003c\/li\u003e\n  \u003cli\u003eLeft-hand cutting direction for climb-cut or reverse-spindle applications\u003c\/li\u003e\n  \u003cli\u003e1\/32 inch nose radius for controlled surface finish\u003c\/li\u003e\n  \u003cli\u003e1 inch x 1 inch shank cross-section fits standard square-shank tool holders\u003c\/li\u003e\n  \u003cli\u003e7 inch overall length for reach in standard lathe setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement for FL-16 industry-standard single-point tool bits used in square-shank tool holders accepting a 1 inch by 1 inch shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSingle-point tool bits of this type are installed and adjusted by qualified machinists. Power down and lock out the lathe before seating or removing the bit from the tool holder. Secure the shank fully within the holder per the holder manufacturer torque and clamping requirements. Verify cutting direction and tool height relative to center before resuming spindle operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: FL-16\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: FL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Type\u003c\/strong\u003e: Offset End Cutting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material Grade\u003c\/strong\u003e: C2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 1\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Turning and Facing to Shoulder; Work Close to Chuck Jaw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112800\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 383-8132\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51707235860786,"sku":"383-8132","price":27.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/616aac17e3a985f232b282b37501118c.jpg?v=1788439107","url":"https:\/\/voomisupply.com\/products\/value-collection-383-8132-single-point-tool-bit-fl-c2-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}