{"product_id":"value-collection-383-8112-fl-10-tool-bit-5-8in-left-hand","title":"Value Collection 383-8112 FL-10 Tool Bit 5\/8in Left Hand","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 383-8112 is a single-point, left-hand offset end cutting tool bit built to FL-10 industry standards. It features a C2 solid carbide tip brazed to a steel shank measuring 5\/8 inches in height and 5\/8 inches in width, with an overall length of 4 inches. The 1\/32-inch nose radius suits general-purpose turning and facing operations. Machinists and tool-and-die technicians use this style of bit on manual and CNC lathes where a left-hand cutting direction is required. It weighs 0.48 pounds and ships as a single unit.\u003c\/p\u003e\u003cp\u003eThis tool bit is designed for turning and facing to a shoulder, as well as work performed close to a chuck jaw. The FL-10 style offset end cutting geometry is commonly applied in job shop and production environments on lathes handling steel, cast iron, and similar machinable metals. The left-hand cutting direction makes it suitable for setups where the tool feeds from left to right or where standard right-hand bits cannot reach the required surface. It is appropriate for both manual lathe operators and programmers setting up CNC turning centers that require offset tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFL-10 industry standard number for straightforward cross-referencing and replacement\u003c\/li\u003e\n\u003cli\u003eLeft-hand offset end cutting geometry for turning and facing to a shoulder\u003c\/li\u003e\n\u003cli\u003eC2 solid carbide tip grade suited for general-purpose turning on ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003e5\/8 inches shank height by 5\/8 inches shank width for use in standard tool holders\u003c\/li\u003e\n\u003cli\u003e1\/32-inch nose radius for general finishing and semi-finish turning passes\u003c\/li\u003e\n\u003cli\u003e4-inch overall length provides reach for close-to-chuck work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct substitute for FL-10 style single-point left-hand tool bits used in standard 5\/8-inch tool holders on manual and CNC lathes.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis tool bit is installed by machinists in a compatible 5\/8-inch tool holder or tool post. The machine spindle must be brought to a complete stop and all power isolated before seating or adjusting the bit. Confirm that the tool holder set screws are properly torqued per the holder manufacturer specification before beginning a cut. Follow applicable shop safety procedures and machine guarding requirements during setup.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry Standard Number\u003c\/strong\u003e: FL-10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Bit Style\u003c\/strong\u003e: FL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Bit Type\u003c\/strong\u003e: Offset End Cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Left Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Height\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Width\u003c\/strong\u003e: 5\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNose Radius\u003c\/strong\u003e: 1\/32 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTip Material Grade\u003c\/strong\u003e: C2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Application\u003c\/strong\u003e: Turning and Facing to Shoulder; Work Close to Chuck Jaw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.48 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112800\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 383-8112\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51723953635634,"sku":"383-8112","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c13bbd5a6b60533d180a8d3581002869.jpg?v=1788610550","url":"https:\/\/voomisupply.com\/products\/value-collection-383-8112-fl-10-tool-bit-5-8in-left-hand","provider":"Voomi Supply","version":"1.0","type":"link"}