{"product_id":"value-collection-375-1602-boring-bar-set-12-piece-c2-carbide","title":"Value Collection 375-1602 Boring Bar Set 12 Piece C2 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 375-1602 is a 12-piece C2 carbide-tipped boring bar set designed for internal diameter machining on lathes and boring mills. Each bar in the set features a right-hand cutting direction and an uncoated bright finish. The set spans a minimum bore diameter range of 7\/16 inch up to 13\/16 inch, with maximum bore depths ranging from 1.125 inches on the smallest bar to 4.5 inches on the largest. Overall length runs from 3.125 inches to 6.5 inches across the set. The 3\/4-inch shank diameter provides rigid tool holding in standard boring bar holders. Machinists and tool-and-die tradespeople reach for this set when a range of bore sizes is needed without swapping between individual tool holders.\u003c\/p\u003e\n\u003cp\u003eThis boring bar set is suited for general-purpose shop work including production turning, repair machining, and custom fabrication where multiple bore sizes are encountered in a single job run. The graduated bar sizes allow the operator to select the appropriate bar for each bore diameter without reconfiguring the setup. The wood stand keeps bars organized and protects carbide tips between uses. This set is appropriate for use in machine shops, maintenance facilities, and vocational training environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e12-piece set covering minimum bore diameters from 7\/16 inch to 13\/16 inch\u003c\/li\u003e\n  \u003cli\u003eC2 carbide-tipped inserts for wear resistance on ferrous and non-ferrous materials\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction for standard lathe and boring mill setup\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch shank diameter for secure clamping in compatible tool holders\u003c\/li\u003e\n  \u003cli\u003eMaximum bore depth up to 4.5 inches on the largest bar in the set\u003c\/li\u003e\n  \u003cli\u003eIncludes wood storage stand to protect tips and organize bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in lathes and boring mills equipped with tool holders accepting a 3\/4-inch shank diameter boring bar.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eBoring bar installation and use should be performed by qualified machinists or toolroom tradespeople familiar with lathe and boring mill operation. Power down and lock out the machine before mounting or removing any tooling. Ensure the shank is fully seated and clamped securely in the tool holder to prevent chatter and tool pull-out during the cut. Inspect carbide tips for chipping or wear before each use and replace or regrind as needed.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 12\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter (Smallest Bar)\u003c\/strong\u003e: 7\/16 inch (0.44 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Bore Diameter (Largest Bar)\u003c\/strong\u003e: 13\/16 inch (0.8125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Bore Depth (Smallest Bar)\u003c\/strong\u003e: 1.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Bore Depth (Largest Bar)\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Overall Length\u003c\/strong\u003e: 3.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Overall Length\u003c\/strong\u003e: 6.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch (0.75 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Carbide-Tipped (C2 Grade)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStand Material\u003c\/strong\u003e: Wood\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5.75 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 375-1602\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51717531828530,"sku":"375-1602","price":393.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f2b72a7db1718d3c95930dad69715c27.jpg?v=1788542023","url":"https:\/\/voomisupply.com\/products\/value-collection-375-1602-boring-bar-set-12-piece-c2-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}