{"product_id":"value-collection-370024ps-m10-flat-washer-zinc-plated","title":"Value Collection 370024PS M10 Flat Washer Zinc-plated","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 370024PS is a standard flat washer designed for use with M10 fasteners. Made from steel with a zinc-plated finish, this washer distributes load across the fastener bearing surface to reduce surface damage and prevent fastener pull-through. It measures 10.5mm inside diameter, 20mm outside diameter, and 2mm thick. The zinc plating provides a layer of corrosion resistance suited to general-purpose indoor and light outdoor applications. Plumbers, electricians, HVAC technicians, and general contractors routinely use flat washers like this in structural connections, equipment mounting, and piping support installations.\u003c\/p\u003e\n\u003cp\u003eThis washer conforms to DIN 125 and ISO 7089\/7090 fastener standards and is sized to the metric M10 screw standard. It is a common choice in both residential and light commercial construction and mechanical assembly where a standardized metric flat washer is required. Typical applications include equipment mounting brackets, conduit supports, pipe hangers, ductwork support hardware, and general mechanical assemblies using M10 bolts or screws.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSteel construction with zinc-plated finish for corrosion resistance in general-purpose applications\u003c\/li\u003e\n  \u003cli\u003eSized for M10 fasteners with 10.5mm inside diameter and 20mm outside diameter\u003c\/li\u003e\n  \u003cli\u003e2mm thickness provides consistent load distribution under the fastener head or nut\u003c\/li\u003e\n  \u003cli\u003eMeets DIN 125, ISO 7089, and ISO 7090 fastener standards\u003c\/li\u003e\n  \u003cli\u003eHardness rated at 140 HV for reliable performance under clamping load\u003c\/li\u003e\n  \u003cli\u003eMetric measurement system for compatibility with metric fastener assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with M10 metric screws and bolts in standard flat washer applications conforming to DIN 125, ISO 7089, and ISO 7090 specifications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall with the washer seated flat against the mating surface, positioned between the fastener head or nut and the workpiece. Power down or de-energize any equipment before working on fastened assemblies in electrical or mechanical systems. Use the appropriate metric torque wrench or driver to avoid deforming the washer under excessive clamping load. Follow applicable code requirements for the trade and application when specifying fastener hardware for structural or pressure-bearing connections.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWasher Type\u003c\/strong\u003e: Standard Flat Washer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Zinc-Plated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScrew Size\u003c\/strong\u003e: M10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInside Diameter\u003c\/strong\u003e: 10.5mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 20mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 2mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 140 HV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standard\u003c\/strong\u003e: DIN 125, ISO 7089, ISO 7090\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMeasurement System\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 370024PS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51719029555506,"sku":"370024PS","price":1322.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7cb3bff2050421bfffff1f2645a38771.jpg?v=1788557041","url":"https:\/\/voomisupply.com\/products\/value-collection-370024ps-m10-flat-washer-zinc-plated","provider":"Voomi Supply","version":"1.0","type":"link"}