{"product_id":"value-collection-3512516555-1-wheel-brush-5-in-nylon","title":"Value Collection 3512516555-1 Wheel Brush 5 in Nylon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 3512516555-1 is a 5-inch diameter wheel brush designed for light deburring, cleaning, and surface finishing tasks. It uses crimped nylon fill material rated to 3,750 RPM, making it suitable for work on softer metals, plastics, and composite surfaces where steel wire would cause damage. The brush mounts via a 5\/8-inch arbor hole and requires no shank adapter for standard bench grinder or arbor setups. Face width is 5\/16 inch with a trim length of 5\/16 inch. This is a fine-grade brush appropriate for finishing passes rather than aggressive material removal.\u003c\/p\u003e\n\u003cp\u003eThis wheel brush is used in industrial maintenance, fabrication shops, and surface prep applications where controlled abrasion is needed without scoring the base material. Typical install scenarios include bench grinder stations and arbor-mounted spindle setups in machine shops, HVAC equipment maintenance bays, and general trade environments. The nylon fill is well suited for cleaning aluminum, copper tubing, and other non-ferrous materials commonly encountered in plumbing and HVAC service work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e5-inch outside diameter suits standard bench grinder arbor configurations\u003c\/li\u003e\n  \u003cli\u003eCrimped nylon fill provides fine-grade surface action without scratching soft metals\u003c\/li\u003e\n  \u003cli\u003e3,750 RPM maximum speed rating for safe operation on typical bench grinders\u003c\/li\u003e\n  \u003cli\u003e5\/8-inch arbor hole mounts directly without a shank — no adapter needed for most setups\u003c\/li\u003e\n  \u003cli\u003e5\/16-inch face width and 5\/16-inch trim length deliver consistent, controlled contact\u003c\/li\u003e\n  \u003cli\u003eNon-encapsulated construction allows full bristle flex during use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with bench grinders and arbor-mounted spindles that accept a 5\/8-inch arbor hole wheel brush at or below 3,750 RPM.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified personnel familiar with bench grinder tooling and rotating equipment safety. Always power down and lockout the grinder before mounting or removing the brush. Confirm the grinder RPM rating meets or does not exceed the 3,750 RPM maximum before operation. Eye protection and appropriate PPE should be worn any time the brush is in use.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 0.3125 inches (5\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 0.3125 inches (5\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArbor Hole Size\u003c\/strong\u003e: 0.625 inches (5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 3,750 RPM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Nylon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Fine\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEncapsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 31191521\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3512516555-1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694790574386,"sku":"3512516555-1","price":29.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/94353ca899a1df8f2b12c7eeb09b7ad6.jpg?v=1788328428","url":"https:\/\/voomisupply.com\/products\/value-collection-3512516555-1-wheel-brush-5-in-nylon","provider":"Voomi Supply","version":"1.0","type":"link"}