{"product_id":"value-collection-34168-open-end-blind-rivet-dome-head-100-pack","title":"Value Collection 34168 Open End Blind Rivet Dome Head 100 Pack","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 34168 is an open end blind rivet with a dome head profile, designed for fastening applications where access is limited to one side of the workpiece. The aluminum body pairs with a steel mandrel to deliver reliable clamping across a grip range of 0.188 to 0.25 inches. The body diameter is 0.125 inches, requiring a drilled hole between 0.129 and 0.133 inches. With a tensile strength of 220 pounds and a shear strength of 170 pounds, this rivet handles light to medium structural fastening in sheet metal, fabrication, and general assembly work. Installation is performed with a standard hand or pneumatic rivet tool. Each package contains 100 rivets.\u003c\/p\u003e\n\u003cp\u003eThis rivet is suited for residential and commercial fabrication, HVAC ductwork assembly, electrical enclosure work, and general sheet metal joining where a flush-entry dome head is acceptable. The aluminum body resists corrosion in typical indoor and light outdoor environments, while the steel mandrel provides consistent pull strength during installation. The 0.25-inch head diameter keeps the fastener low-profile against the workpiece surface. Wire drill size for hole preparation is number 30.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eOpen end blind rivet design allows single-side installation without rear access\u003c\/li\u003e\n  \u003cli\u003eAluminum body (alloy grade 5056) with bright finish for corrosion resistance in light-duty environments\u003c\/li\u003e\n  \u003cli\u003eSteel mandrel with phosphate finish for consistent pull and break performance\u003c\/li\u003e\n  \u003cli\u003eDome head profile with 0.25-inch head diameter and 0.04-inch head height\u003c\/li\u003e\n  \u003cli\u003eTensile strength of 220 pounds and shear strength of 170 pounds\u003c\/li\u003e\n  \u003cli\u003eGrip range of 0.188 to 0.25 inches accommodates varying material stack thicknesses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard-specification blind rivet for applications requiring a 0.125-inch body diameter open end dome head fastener with a number 30 drill size hole.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by sheet metal workers, HVAC technicians, electricians, and general fabricators using a standard hand-pull or pneumatic rivet tool matched to the 0.125-inch body diameter. Drill the receiving hole to between 0.129 and 0.133 inches before setting the rivet. Insert the rivet body fully through the hole before actuating the tool, and confirm the mandrel stem has snapped cleanly after setting. Do not attempt to set these rivets by hammer or press, as the mandrel requires controlled axial tension to seat correctly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRivet Type\u003c\/strong\u003e: Open End\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Type\u003c\/strong\u003e: Dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Diameter\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Height\u003c\/strong\u003e: 0.04 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Diameter\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Under Head\u003c\/strong\u003e: 0.40 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Grip\u003c\/strong\u003e: 0.188 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Grip\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.129 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Diameter\u003c\/strong\u003e: 0.133 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Size (Wire)\u003c\/strong\u003e: Number 30\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Material\u003c\/strong\u003e: Aluminum (Grade 5056)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel Material\u003c\/strong\u003e: Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBody Finish\u003c\/strong\u003e: Bright\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMandrel Finish\u003c\/strong\u003e: Phosphate\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTensile Strength\u003c\/strong\u003e: 220 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShear Strength\u003c\/strong\u003e: 170 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 100\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 34168\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51717929992498,"sku":"34168","price":19.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/db4bbf9a210f04e664cc89c0138b3a24.jpg?v=1788547550","url":"https:\/\/voomisupply.com\/products\/value-collection-34168-open-end-blind-rivet-dome-head-100-pack","provider":"Voomi Supply","version":"1.0","type":"link"}