{"product_id":"value-collection-3015000c1ms-heat-shrink-tubing-25-ft","title":"Value Collection 3015000C1MS Heat Shrink Tubing 25 Ft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 3015000C1MS is a clear PVC heat shrink tubing sleeve designed for wire protection, bundling, and insulation in electrical and low-voltage wiring applications. With a 2:1 shrink ratio, the tubing starts at 1.5 inches inside diameter and shrinks down to 0.75 inches when heat is applied at or above 212 degrees F. The wall thickness after shrinking measures 0.043 inches. At 25 feet per roll, this sleeve is well suited for job-site use where multiple terminations or long wire runs require consistent protection. Electricians and electrical contractors are the primary installers for this type of product.\u003c\/p\u003e\u003cp\u003eThis heat shrink tubing is appropriate for residential and commercial electrical work, panel wiring, junction protection, and cable management on conduit or exposed runs. The clear color allows visual inspection of the wire or connector beneath the sleeve after installation. Its resistance profile makes it suitable for environments with exposure to acids, oils, UV light, or sunlight, as well as applications requiring flame-resistant and fungus-resistant insulation. The operating temperature range of -4 degrees F to 221 degrees F covers most indoor and outdoor electrical service conditions.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2:1 shrink ratio with 1.5 inch ID before shrinking and 0.75 inch ID after shrinking\u003c\/li\u003e\n\u003cli\u003eShrink activation temperature of 212 degrees F\u003c\/li\u003e\n\u003cli\u003eClear PVC construction allows visual inspection after installation\u003c\/li\u003e\n\u003cli\u003eResistant to acid, oil, flame, fungus, UV, sunlight, and splitting\u003c\/li\u003e\n\u003cli\u003eOperating range from -4 degrees F to 221 degrees F\u003c\/li\u003e\n\u003cli\u003e25-foot continuous length per roll for multi-termination jobs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose heat shrink sleeve for wire management and insulation applications in electrical tubing and wire protection installations where a 2:1 ratio, 1.5 inch starting ID, and clear PVC material are specified.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by licensed electricians or qualified electrical technicians following applicable NEC guidelines for wire insulation and protection. De-energize all circuits before applying heat shrink tubing to any wiring or termination. Use a heat gun with controlled output to apply even heat around the tubing circumference; open flame torches are not recommended for PVC heat shrink. Ensure the wire or connector is clean and dry before sliding the tubing into position.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Polyvinylchloride (PVC)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor\u003c\/strong\u003e: Clear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrink Ratio\u003c\/strong\u003e: 2:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter Before Shrinking\u003c\/strong\u003e: 1.5 inches (38.10 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInside Diameter After Shrinking\u003c\/strong\u003e: 0.75 inches (19.05 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWall Thickness After Shrinking\u003c\/strong\u003e: 0.043 inches (1.09 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 25 feet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShrink Temperature\u003c\/strong\u003e: 212 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Operating Temperature\u003c\/strong\u003e: -4 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Temperature\u003c\/strong\u003e: 221 degrees F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResistance Features\u003c\/strong\u003e: Acid-Resistant, Flame-Resistant, Fungus-Resistant, Oil-Resistant, Split-Resistant, Sunlight-Resistant, UV-Resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ASTM D3150, CSA OFT, RoHS Compliant, SAE-AMS-DTL-23053\/2 Class 2, UL 224 VW-1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3015000C1MS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":68384119947570,"sku":"3015000C1MS","price":81.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3576776eece0d3b33b3dbc34833356a2.jpg?v=1793901682","url":"https:\/\/voomisupply.com\/products\/value-collection-3015000c1ms-heat-shrink-tubing-25-ft","provider":"Voomi Supply","version":"1.0","type":"link"}