{"product_id":"value-collection-261017-aircraft-extension-drill-bit-17-64","title":"Value Collection 261017 Aircraft Extension Drill Bit 17\/64","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 261017 is a carbide-tipped aircraft extension drill bit designed for drilling in hard-to-reach locations where standard-length bits fall short. Built to a 135-degree split point geometry with a self-centering tip, it starts on contact without walking, reducing the need for a center punch on most materials. The bit measures 17\/64 inch (0.2656 inch decimal) in diameter, carries a 2-7\/8 inch flute length, and runs to 6 inches overall. The bright\/uncoated finish suits general-purpose drilling in steel, aluminum, and composite materials. Installed and used by aviation maintenance technicians, sheet metal workers, and industrial mechanics, this bit handles access drilling in tight or deep structural assemblies.\u003c\/p\u003e\n\u003cp\u003eThis aircraft extension drill bit is suited for applications where standard jobber-length bits cannot reach, including airframe structural panels, deep-cavity sheet metal assemblies, and industrial fabrication work. The extended overall length of 6 inches provides the clearance needed to drill through bulkheads, flanges, and recessed structures. The two-flute spiral configuration with tapered web and web-thinned geometry promotes efficient chip evacuation during extended-reach drilling. The straight-cylindrical shank seats securely in standard drill chucks and right-angle drill attachments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCarbide-tipped cutting edge for durability in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point with self-centering geometry eliminates walking on entry\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web construction promotes chip clearance in deep holes\u003c\/li\u003e\n  \u003cli\u003e6-inch overall length with 2-7\/8 inch flute length for extended-reach access drilling\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank compatible with standard drill chucks and right-angle drivers\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction with two-flute spiral flute configuration\u003c\/li\u003e\n  \u003cli\u003eMeets NAS 907 standards for aircraft drill bit geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose aircraft extension drill bit conforming to NAS 907 standards, suitable for use with standard three-jaw drill chucks and right-angle drill attachments accepting a 17\/64 inch straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed and operated by aviation maintenance technicians, sheet metal mechanics, and industrial fabricators working under applicable maintenance and fabrication standards. Secure the straight-cylindrical shank fully in the drill chuck before operation to prevent slippage during extended-reach drilling. Use appropriate cutting fluid or lubricant when drilling ferrous materials to preserve carbide tip life. Inspect the cutting edges before each use and do not force a worn or chipped bit, as carbide tips are brittle and can fracture under lateral load.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 17\/64 inch (0.2656 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-7\/8 inches (2.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 17\/64 inch (0.2656 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Carbide-Tipped\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 2610\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: NAS 907\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 261017\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51721311387954,"sku":"261017","price":202.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/317dc4f31f0aee6a8de5677a9fc8f2cf.jpg?v=1788576251","url":"https:\/\/voomisupply.com\/products\/value-collection-261017-aircraft-extension-drill-bit-17-64","provider":"Voomi Supply","version":"1.0","type":"link"}