{"product_id":"value-collection-210-5508-shell-mill-holder-1-in-pilot","title":"Value Collection 210-5508 Shell Mill Holder 1 in Pilot","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 210-5508 is a straight-shank shell mill holder designed to secure shell mills and face mills in CNC machining centers and manual milling machines. The holder features a 1-inch pilot diameter and a 3\/4-inch straight shank, with an overall length of approximately 155.50 mm (6.12 inches). It provides a rigid, concentric interface between the machine spindle and the cutting tool, which is critical for maintaining accuracy and surface finish during face milling and contouring operations. This holder does not include through-coolant capability. Machinists and CNC operators in metalworking shops are the primary installers and users of this toolholder.\u003c\/p\u003e\n\u003cp\u003eThis shell mill holder is suited for use in job shops, production machining environments, and tool rooms where straight-shank tooling is required. It is compatible with milling machines and machining centers that accept a 3\/4-inch straight shank. The 1-inch pilot diameter accommodates standard shell mills and face mills with a corresponding bore. Typical applications include flat surface milling, shoulder milling, and general-purpose material removal on ferrous and non-ferrous workpieces.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-inch pilot diameter (25.40 mm) for secure shell mill seating\u003c\/li\u003e\n  \u003cli\u003e3\/4-inch straight shank for compatibility with standard straight-shank spindles and chucks\u003c\/li\u003e\n  \u003cli\u003eOverall length of 155.50 mm (approximately 6.12 inches) for reach in typical milling setups\u003c\/li\u003e\n  \u003cli\u003eNo through-coolant — suitable for dry or flood coolant applied externally\u003c\/li\u003e\n  \u003cli\u003eCompact cross-section at 2.2 inches height and 2.2 inches width for clearance in tight setups\u003c\/li\u003e\n  \u003cli\u003eWeighs 1 pound for easy handling and tool change\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-fit toolholder for milling machines and machining centers that accept a 3\/4-inch straight shank and use shell mills with a 1-inch pilot bore.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator with the machine powered down and the spindle locked before mounting or removing the holder. The straight shank should be clean and free of burrs before insertion into the spindle or chuck. Torque any retention screws or drawbar fasteners to the machine tool manufacturer specifications — do not over-tighten. Verify runout with a dial indicator after installation before commencing any cutting operation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePilot Diameter\u003c\/strong\u003e: 1 inch (25.40 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 155.50 mm (approximately 6.12 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 2.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 2.2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 6.02 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 1 pound\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112800\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 210-5508\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51703761666354,"sku":"210-5508","price":116.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/0ab1ca6e17ac13c8340154f900c04d90.jpg?v=1788418496","url":"https:\/\/voomisupply.com\/products\/value-collection-210-5508-shell-mill-holder-1-in-pilot","provider":"Voomi Supply","version":"1.0","type":"link"}