{"product_id":"value-collection-20-1410-interior-grooving-tool","title":"Value Collection 20-1410 Interior Grooving Tool","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 20-1410 is a solid carbide interior grooving tool designed for right-hand cutting in small-bore applications. Built from micrograin solid carbide, this tool delivers consistent edge integrity and wear resistance in demanding machining environments. It features a full-radius cutting profile and undercut geometry, making it well-suited for internal groove and relief operations. With an overall length of 2.5 inches and a shank diameter of 5\/16 inch, the 20-1410 is sized for precision work in confined bores where rigidity and tight tolerances are required. Machinists and tool-and-die professionals working on CNC lathes and manual turning centers rely on this type of tool for repeatable interior grooving results.\u003c\/p\u003e\n\u003cp\u003eThis tool is configured for interior grooving operations with a minimum hole diameter of 0.3125 inches and a maximum hole depth of 1 inch. The 1-inch projection allows reach into shallow bores without sacrificing stability. The shank length of 1.5 inches provides adequate tool-holder engagement for secure mounting. Typical applications include internal relief cuts, snap-ring grooves, and undercut features in metalworking operations across aerospace, automotive, and general manufacturing environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid micrograin carbide construction for superior wear resistance and edge retention\u003c\/li\u003e\n  \u003cli\u003eFull-radius cutting profile supports clean, consistent groove geometry\u003c\/li\u003e\n  \u003cli\u003eUndercut capability for internal relief and snap-ring groove applications\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction for standard lathe and turning center setups\u003c\/li\u003e\n  \u003cli\u003eMinimum hole diameter of 0.3125 inches enables work in tight-bore applications\u003c\/li\u003e\n  \u003cli\u003eNo adjusting screw design simplifies setup and reduces potential failure points\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-fit option for standard 5\/16-inch shank tool holders used in interior grooving applications on CNC and manual turning equipment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of this grooving tool should be performed by a qualified machinist familiar with turning operations and tool-holder specifications. Ensure the machine spindle is fully stopped and all power is isolated before mounting or removing the tool. Verify shank-to-holder fit and projection length against the specific bore geometry before beginning cuts. Follow all applicable workplace safety and machine operation standards for cutting tool handling and setup.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrooving Tool Type\u003c\/strong\u003e: Grooving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInterior\/Exterior\u003c\/strong\u003e: Interior\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.3125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Depth\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProjection\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Micrograin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull Radius\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUndercut\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Bit Adjusting Screw\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20-1410\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699880395058,"sku":"20-1410","price":70.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/024d9b2f452e5c8f56fda6a097743371.jpg?v=1788382478","url":"https:\/\/voomisupply.com\/products\/value-collection-20-1410-interior-grooving-tool","provider":"Voomi Supply","version":"1.0","type":"link"}