{"product_id":"value-collection-151214pr-set-screw-1-4-20-x-1-4-in-flat-point-gr8","title":"Value Collection 151214PR Set Screw 1\/4-20 X 1\/4 in Flat Point Gr8","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 151214PR is a 1\/4-20 x 1\/4 inch flat point set screw manufactured from Grade 8 alloy steel. Set screws of this type are fully threaded, headless fasteners used to secure a component — such as a collar, gear, or pulley — against a shaft by applying direct clamping force at the point contact. This screw uses a 1\/8 inch hex (Allen) drive and conforms to ASME\/ANSI B18.3 and ASTM F912 standards. Grade 8 alloy steel provides high tensile strength suitable for demanding mechanical assemblies. The UNC thread standard and fractional inch sizing make this a common choice in industrial, HVAC equipment, and mechanical maintenance applications.\u003c\/p\u003e\n\u003cp\u003eThis set screw is suited for use in residential and commercial mechanical assemblies where a flush or recessed fastener is required. Flat point set screws are preferred when minimal surface damage to the mating shaft is needed and when the screw must sit flush with the workpiece surface. Typical applications include motor shaft collars, fan hubs, conveyor components, and equipment found in HVAC, plumbing, and general industrial service. This SKU is sold individually but carries a minimum order quantity of 100 units per order.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eGrade 8 alloy steel construction for high tensile and torsional strength\u003c\/li\u003e\n  \u003cli\u003eFlat point tip minimizes marring on mating shaft surfaces\u003c\/li\u003e\n  \u003cli\u003e1\/8 inch hex (Allen) drive for use with standard hex keys\u003c\/li\u003e\n  \u003cli\u003e1\/4-20 UNC thread for wide compatibility with standard tapped holes\u003c\/li\u003e\n  \u003cli\u003eMeets ASME\/ANSI B18.3 and ASTM F912 fastener standards\u003c\/li\u003e\n  \u003cli\u003eFractional inch sizing for straightforward replacement and sourcing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard replacement or stock fastener for any mechanical assembly using a 1\/4-20 UNC tapped hole requiring a flat point set screw per ASME\/ANSI B18.3.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed using a 1\/8 inch hex key torqued by hand or with a T-handle driver. De-energize and lock out any equipment before servicing fasteners on rotating or motorized components. Do not exceed the rated torque range for the thread size and grade as specified in the applicable mechanical or equipment service documentation. Inspect the mating shaft and tapped hole for damage or contamination before installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: 1\/4-20 UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 1\/4 inches (overall)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Flat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrive Type\u003c\/strong\u003e: Hex (Allen)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHex Key Size\u003c\/strong\u003e: 1\/8 inch (0.1250 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Alloy Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: Grade 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: UNC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFastener Standard\u003c\/strong\u003e: ASME\/ANSI B18.3, ASTM F912\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMeasurement Type\u003c\/strong\u003e: Fractional Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 100 units\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 151214PR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694509195570,"sku":"151214PR","price":3200.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4d531a9d8f5434f7cc7b79e62bc3d1dd.jpg?v=1788324832","url":"https:\/\/voomisupply.com\/products\/value-collection-151214pr-set-screw-1-4-20-x-1-4-in-flat-point-gr8","provider":"Voomi Supply","version":"1.0","type":"link"}