{"product_id":"value-collection-144429602505000-chucking-reamer-hss","title":"Value Collection 144429602505000 Chucking Reamer Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 144429602505000 is a chucking reamer designed to bring bored or drilled holes to a precise finished diameter. Built from high-speed steel (HSS) with a bright, uncoated finish, this reamer features a 0.2505-inch cutting diameter and a straight-cylindrical shank for secure chuck mounting. Six straight flutes and a right-hand cutting direction deliver clean, consistent material removal in a range of ferrous and non-ferrous workpiece materials. Machinists and tool-and-die technicians reach for chucking reamers when hole tolerances demand accuracy beyond what a drill alone can achieve.\u003c\/p\u003e\n\u003cp\u003eThis reamer is suited for machine-based reaming operations on drill presses, lathes, and milling machines. The straight-cylindrical shank seats directly in standard drill chucks or collet holders without modification. At 0.2505 inches, the cutting diameter falls within the 0.2500 to 0.2999-inch decimal inch range, making it the appropriate selection when a finished hole close to 1\/4 inch is required and a standard 0.2500-inch reamer would leave insufficient wall stock for press or locating fits.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.2505-inch cutting diameter for close-tolerance finishing of near-1\/4-inch holes\u003c\/li\u003e\n  \u003cli\u003eHSS construction provides toughness and wear resistance across a broad range of workpiece materials\u003c\/li\u003e\n  \u003cli\u003e6-flute geometry distributes cutting load evenly and promotes smooth surface finish\u003c\/li\u003e\n  \u003cli\u003eStraight flutes suit through-hole and blind-hole reaming in most machine setups\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard drill chucks and collet holders without adapters\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish — no coating thickness variation to account for in diameter calculations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a machine-mounted chucking reamer for use in drill presses, lathes, and milling machines equipped with a standard drill chuck or collet system accepting a straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eChucking reamers are installed and operated by machinists following standard machine-shop practices. Secure the straight-cylindrical shank fully in the chuck or collet and verify runout before cutting. Always reduce spindle speed significantly compared to drilling — typical practice is to run a reamer at roughly one-half to one-third of the drilling speed for the same material, though the operator should consult applicable feeds-and-speeds references for the specific workpiece. Use cutting fluid appropriate to the workpiece material to extend tool life and improve surface finish.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.2505 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Range\u003c\/strong\u003e: 0.2500 to 0.2999 inches (decimal inch class)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS (High-Speed Steel)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 144429602505000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51710755733810,"sku":"144429602505000","price":65.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a7b118b1ab0a42b81ac9a1a91204cd63.jpg?v=1788470253","url":"https:\/\/voomisupply.com\/products\/value-collection-144429602505000-chucking-reamer-hss","provider":"Voomi Supply","version":"1.0","type":"link"}