{"product_id":"value-collection-144429601270000-chucking-reamer-hss","title":"Value Collection 144429601270000 Chucking Reamer Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 144429601270000 is a high-speed steel (HSS) chucking reamer designed to finish-ream drilled or bored holes to a precise 0.1270-inch diameter. Straight flutes and a bright, uncoated surface make this reamer well suited for softer ferrous and non-ferrous materials where chip flow is straightforward. The straight-cylindrical shank seats cleanly in standard drill chucks or collet holders on lathes, drill presses, and CNC machining centers. With six flutes and a right-hand cutting direction, the tool produces smooth bore surfaces and holds tight dimensional tolerances. Machinists, toolmakers, and maintenance technicians install this reamer as a finishing step after rough drilling.\u003c\/p\u003e\n\u003cp\u003eThis reamer covers the 0.1000 to 0.1499 inch diameter range class and is a solid choice for production and repair applications requiring a finished 0.1270-inch bore. Typical use cases include reaming precision pin-hole locations, bearing bores, and close-tolerance clearance holes in light manufacturing and maintenance environments. It is equally at home in a manual lathe tailstock setup or a CNC turret. The standard straight-cylindrical shank makes it compatible with a wide variety of common workholding setups already on the shop floor.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.1270-inch finished bore diameter with straight-cylindrical shank for broad chuck compatibility\u003c\/li\u003e\n  \u003cli\u003eHSS construction provides good toughness and regrindability compared to carbide\u003c\/li\u003e\n  \u003cli\u003eSix-flute geometry improves surface finish and distributes cutting load evenly\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction — standard for conventional reaming operations\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suitable for use with standard cutting fluids on most common materials\u003c\/li\u003e\n  \u003cli\u003eNot configured as a dowel-pin or over\/under-size reamer — nominal sizing only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard chucking reamer for use in drill presses, engine lathes, and CNC machining centers equipped with a drill chuck or collet system accepting a straight-cylindrical shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis reamer should be installed by a qualified machinist or toolroom technician. Always secure the workpiece and confirm the shank is fully seated and properly clamped before starting the spindle. Apply appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish. Do not use a chucking reamer to remove excessive stock — pre-drill or bore the hole to within a few thousandths of final diameter before reaming.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.1270 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Range Class\u003c\/strong\u003e: 0.1000 - 0.1499 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 144429601270000\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51718830620978,"sku":"144429601270000","price":50.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9b3a3d418b3f3a3e11a5ec049a5ae2a4.jpg?v=1788555837","url":"https:\/\/voomisupply.com\/products\/value-collection-144429601270000-chucking-reamer-hss","provider":"Voomi Supply","version":"1.0","type":"link"}