{"product_id":"value-collection-14442960031600s-chucking-reamer-hss","title":"Value Collection 14442960031600S Chucking Reamer Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 14442960031600S is a high-speed steel (HSS) chucking reamer designed to produce accurate, smooth-bore holes in metalworking applications. With a 3\/16 inch (0.1875 inch decimal) cutting diameter and a 4-1\/2 inch overall length, this reamer delivers consistent sizing and finish in through-holes and blind holes alike. The spiral flute geometry with a right-hand cut promotes efficient chip evacuation and reduces chatter during operation. The bright, uncoated finish is standard for general-purpose HSS tooling. Machinists and tool-and-die technicians install this reamer in CNC machining centers, drill presses, and manual lathes to bring pre-drilled holes to final dimensional tolerance.\u003c\/p\u003e\n\u003cp\u003eThis chucking reamer is suited for finishing operations on ferrous and non-ferrous metals in production and job-shop environments. The straight-cylindrical shank is compatible with standard collet chucks, drill chucks, and floating reamer holders commonly used in both manual and CNC setups. The 1-1\/8 inch flute length provides adequate cutting engagement for typical through-hole and shallow blind-hole reaming tasks at this diameter. It is appropriate for residential shop, industrial production, and maintenance-repair-operations (MRO) work where close-tolerance hole finishing is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS construction provides good wear resistance and toughness across a wide range of common workpiece materials\u003c\/li\u003e\n  \u003cli\u003eSpiral right-hand flute geometry promotes smooth chip evacuation and reduces the risk of chatter\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard drill chucks, collet chucks, and floating holders without modification\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish suits general-purpose metal reaming without the overhead cost of specialty coatings\u003c\/li\u003e\n  \u003cli\u003e0.1875 inch decimal diameter falls in the 0.1500 to 0.1999 inch diameter range for standard sizing reference\u003c\/li\u003e\n  \u003cli\u003eCompact 4-1\/2 inch overall length keeps the tool rigid in short-reach setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose chucking reamer for use in standard drill chucks, collet chucks, and floating reamer holders that accept a straight-cylindrical shank at this diameter class.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of chucking reamers is performed by qualified machinists or tool-and-die technicians. Ensure the machine spindle is fully stopped and the workpiece is securely fixtured before installing or removing the tool. Pre-drill or bore the hole to an appropriate undersize before reaming to final dimension, as reaming is a finishing operation and is not intended to remove large amounts of material. Use appropriate cutting fluid for the workpiece material to extend tool life and improve surface finish.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 3\/16 inches (0.1875 inches decimal)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-1\/8 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: HSS (High-Speed Steel)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDowel Pin Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOver\/Under Size Reamer\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.09 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 14442960031600S\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51711720522034,"sku":"14442960031600S","price":31.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/358f67b1664786fd39dce1cfcaf89e50.jpg?v=1788478884","url":"https:\/\/voomisupply.com\/products\/value-collection-14442960031600s-chucking-reamer-hss","provider":"Voomi Supply","version":"1.0","type":"link"}