{"product_id":"value-collection-0315078320-wheel-brush-6-in-crimped-brass","title":"Value Collection 0315078320 Wheel Brush 6 in Crimped Brass","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 0315078320 is a 6-inch diameter wheel brush designed for surface preparation, deburring, cleaning, and finishing applications across metal fabrication, welding, and maintenance work. It features crimped brass wire fill material, which provides a flexible, moderate-aggressiveness action suited to softer metals and surfaces where steel wire would cause excessive marking or contamination. The brush mounts via a 2-inch arbor hole and is rated to a maximum of 6,000 RPM. With a face width of 7\/8 inch and a trim length of 1-1\/8 inches, it delivers consistent contact across the work surface. The unit weighs 0.53 pounds and does not include a shank.\u003c\/p\u003e\u003cp\u003eThis wheel brush is used in industrial maintenance, general fabrication shops, and metalworking environments. Typical applications include rust and scale removal, weld spatter cleanup, surface conditioning on brass, copper, aluminum, and other non-ferrous metals, and light deburring of machined components. The crimped wire construction is well suited to contoured or irregular surfaces. It is installed on bench grinders, arbor-mounted grinders, or spindle-driven equipment that accommodates a 2-inch arbor hole.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6-inch outside diameter with a 7\/8-inch face width for broad surface coverage\u003c\/li\u003e\n\u003cli\u003eCrimped brass wire fill provides flexible, non-ferrous-safe brushing action\u003c\/li\u003e\n\u003cli\u003e2-inch arbor hole mount — compatible with standard arbor-driven grinders and spindles\u003c\/li\u003e\n\u003cli\u003eRated to 6,000 RPM maximum operating speed\u003c\/li\u003e\n\u003cli\u003e1-1\/8-inch trim length for consistent wire engagement on flat and irregular surfaces\u003c\/li\u003e\n\u003cli\u003eNo shank included — direct arbor hole mounting only\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on arbor-mounted bench grinders and spindle-driven equipment that accepts a 2-inch arbor hole wheel brush.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of wheel brushes should be performed by personnel trained in abrasive and power brush safety. Always power down and lock out the grinder or spindle drive before mounting or removing the brush. Verify that the machine's rated spindle speed does not exceed the 6,000 RPM maximum marked on this brush — operating above the rated RPM is a safety hazard. Inspect the wire fill and hub for damage before each use, and confirm the arbor hardware is properly torqued per the equipment manufacturer's guidelines.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutside Diameter\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFace Width\u003c\/strong\u003e: 7\/8 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArbor Hole Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim Length\u003c\/strong\u003e: 1-1\/8 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Type\u003c\/strong\u003e: Crimped\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill Material\u003c\/strong\u003e: Brass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilament Wire Diameter\u003c\/strong\u003e: Up to 0.0099 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum RPM\u003c\/strong\u003e: 6,000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount Type\u003c\/strong\u003e: Arbor Hole\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Included\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEncapsulated\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.53 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 0315078320\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51700290191666,"sku":"0315078320","price":145.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8f94e5dbc0362ee37b7e225d01cf3883.jpg?v=1788388570","url":"https:\/\/voomisupply.com\/products\/value-collection-0315078320-wheel-brush-6-in-crimped-brass","provider":"Voomi Supply","version":"1.0","type":"link"}