{"product_id":"value-collection-01665561-taper-shank-drill-bit-7-8-in-3mt-hss","title":"Value Collection 01665561 Taper Shank Drill Bit 7\/8 in 3MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01665561 is a taper shank drill bit built for heavy-duty drilling in metal, steel, and similar materials. It accepts a No. 3 Morse Taper (3MT) shank, making it compatible with drill presses, lathes, and milling machines equipped with a matching MT3 spindle or sleeve. The cutting diameter is 7\/8 inches (0.8750 inches decimal), with a 118-degree standard point angle and a web-thinned tip geometry that reduces entry force and improves chip evacuation. The flute length runs 17 inches and the overall length (OAL) is 24 inches. This bit is manufactured from high-speed steel (HSS) with an oxide finish that provides a baseline level of surface hardness and corrosion resistance for general-purpose shop use.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for general-purpose drilling operations in machine shop, fabrication, and maintenance environments. The 3MT taper shank provides a self-holding connection in compatible spindles, eliminating the need for a chuck and allowing efficient transfer of torque at larger diameters. The 7\/8-inch diameter and 24-inch OAL make this bit particularly useful for deep-hole applications such as drilling through structural members, thick plate, or long workpieces where a standard jobber-length bit would not reach. Installation and use is typically performed by machinists, tool-and-die workers, and maintenance technicians.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/8 inches (0.8750 inches) cutting diameter for larger-diameter bore applications\u003c\/li\u003e\n  \u003cli\u003eNo. 3 Morse Taper (3MT) shank for self-holding fit in compatible machine spindles\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned geometry for reduced entry force\u003c\/li\u003e\n  \u003cli\u003e17-inch spiral flute length supports deep-hole drilling and chip clearance\u003c\/li\u003e\n  \u003cli\u003e24-inch overall length reaches workpieces that short-series bits cannot\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for general-purpose metal cutting\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction, regular spiral flute type\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in drill presses, lathes, and milling machines fitted with a No. 3 Morse Taper spindle or with an appropriate MT3 adapter sleeve. This is a general-purpose HSS taper shank drill bit in the Series 502 product line.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or qualified maintenance personnel. Ensure the machine spindle or sleeve bore is clean and free of chips before seating the taper shank. Power down and lock out the machine before inserting or removing the bit. A drill drift is the correct tool for ejecting a Morse Taper shank — never strike the bit body directly. Secure the workpiece properly and select an appropriate feed rate and spindle speed for the material being drilled.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 7\/8 inches (0.8750 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 24 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 17 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: No. 3 Morse Taper (3MT)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating \/ Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 502\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241639\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01665561\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51712790167858,"sku":"01665561","price":184.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e30b6f4af2b4eb2266a295c43aa8a90c.jpg?v=1788488620","url":"https:\/\/voomisupply.com\/products\/value-collection-01665561-taper-shank-drill-bit-7-8-in-3mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}