{"product_id":"value-collection-01552041-taper-shank-drill-bit-5mt-hss","title":"Value Collection 01552041 Taper Shank Drill Bit 5MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01552041 is a taper shank drill bit designed for heavy-duty drilling applications in metal, steel, and similar materials. Built from high-speed steel with an oxide finish, it accepts a 5MT (Morse Taper No. 5) shank for direct mounting in compatible drill press spindles and milling machine quills. The 2-1\/16 inch diameter cutting edge, 118-degree standard point angle, and web-thinned tip reduce entry force and improve chip clearance at large diameters. Machinists, tool-and-die shops, and industrial maintenance crews rely on this bit for production and general-purpose hole-making where consistent geometry and dimensional accuracy matter.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for general-purpose drilling in ferrous and non-ferrous metals, cast iron, and similar workpiece materials. The right-hand spiral flute with a 10-1\/4 inch flute length evacuates chips efficiently over deep cuts, while the 18 inch overall length accommodates extended-reach setups. It is commonly used in floor-mounted drill presses, radial arm drills, and horizontal boring mills equipped with No. 5 Morse Taper spindles. No coolant-through capability is present, so external flood or mist coolant is recommended when drilling steel at this diameter.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2-1\/16 inch (2.0625 inch) cutting diameter for large-bore hole-making\u003c\/li\u003e\n  \u003cli\u003eNo. 5 Morse Taper (5MT) shank for direct spindle mounting without a chuck\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip to reduce thrust and improve centering\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for general-purpose durability\u003c\/li\u003e\n  \u003cli\u003eRight-hand regular spiral flute, 10-1\/4 inch flute length, for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003e18 inch overall length supports extended-reach drilling setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in drill press spindles, radial arm drills, and boring mills fitted with a No. 5 Morse Taper (5MT) socket. Verify spindle taper designation before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or qualified machine operators. Power down and lock out the machine before inserting or removing the taper shank. Clean both the bit taper and the spindle socket thoroughly before seating — debris will cause runout and premature wear. Use a drift and soft mallet to properly seat and later eject the taper; never strike the cutting end of the bit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2-1\/16 inches (2.0625 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 5MT (Morse Taper No. 5)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 10-1\/4 inches (10.25 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 18 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241639\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01552041\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51723808211250,"sku":"01552041","price":669.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3713d465f3e18d8024064d8787675ee7.jpg?v=1788608315","url":"https:\/\/voomisupply.com\/products\/value-collection-01552041-taper-shank-drill-bit-5mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}