{"product_id":"value-collection-01551605-taper-shank-drill-bit-5mt-hss","title":"Value Collection 01551605 Taper Shank Drill Bit 5MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01551605 is a taper shank drill bit designed for heavy-duty drilling in metal, steel, and similar ferrous materials. It accepts a 5MT (Morse Taper 5) shank, seating directly into compatible taper-socket spindles on drill presses, lathes, and milling machines. The cutting diameter is 1-15\/16 inches (1.9375 inches decimal), with a 118-degree standard point angle and a web-thinned tip to reduce thrust at entry. The tool is manufactured from high-speed steel (HSS) with an oxide finish that provides baseline lubrication resistance during cutting. Installation and operation are handled by machinists and tool-room technicians working with production or maintenance drilling operations.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for general-purpose drilling applications where a large-diameter hole is required without the need for a separate pilot or step operation. The spiral flute geometry with right-hand cutting direction handles chip evacuation in through-hole and deep-hole applications. The oxide finish is appropriate for dry or mist-lubricated drilling. Typical environments include machine shops, fabrication facilities, and maintenance departments where a 5MT spindle machine is available for large-diameter work.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-15\/16 inch (1.9375 inch) cutting diameter for large-bore drilling\u003c\/li\u003e\n  \u003cli\u003e5MT Morse Taper shank for direct spindle mount — no chuck required\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip to reduce entry thrust\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction for general-purpose metal drilling\u003c\/li\u003e\n  \u003cli\u003eOxide finish for basic corrosion and heat resistance during cutting\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute for efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in machine spindles, drill presses, lathes, and milling machines equipped with a No. 5 Morse Taper (5MT) socket. Not compatible with standard 3-jaw chucks or straight-shank tool holders.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by a qualified machinist or tool-room technician. Power down and lock out the machine before seating or removing the taper shank from the spindle socket. Ensure the taper surfaces are clean and free of chips or burrs before seating — debris will prevent full contact and can cause runout or shank slippage under load. Use a drift and drift slot to safely eject the shank; never strike the spindle housing directly.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1-15\/16 inches (1.9375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 5MT (Morse Taper 5)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 17-3\/8 inches (17.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 10-3\/8 inches (10.375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 8.62 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01551605\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51698818613554,"sku":"01551605","price":562.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f41f98100ff177e3a86e109bf20b627b_2da8d2d4-2f8a-40de-ad81-8eb6544e70ec.jpg?v=1788368413","url":"https:\/\/voomisupply.com\/products\/value-collection-01551605-taper-shank-drill-bit-5mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}