{"product_id":"value-collection-01541184-taper-shank-drill-bit-4mt-hss","title":"Value Collection 01541184 Taper Shank Drill Bit 4MT Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01541184 is a taper shank drill bit designed for heavy-duty drilling in metal, cast iron, and similar materials. Built from high-speed steel with an oxide finish, it delivers consistent performance in general-purpose machining applications. The bit features a 1-9\/32 inch (1.2813 inch decimal) diameter, a 118-degree standard point angle, and a web-thinned tip geometry that reduces thrust and improves chip clearing at entry. A right-hand spiral flute with a 7.25 inch flute length moves chips efficiently out of the hole. At 13.125 inches overall length, this bit is suited for work requiring extended reach or deep-hole drilling on drill presses and milling machines.\u003c\/p\u003e\n\u003cp\u003eThis taper shank drill bit fits machine tool spindles with a No. 4 Morse Taper (4MT) socket, making it compatible with drill presses, lathes, and milling machines equipped with a matching taper bore. It is a general-purpose cutting tool used in job shops, manufacturing facilities, and maintenance environments. Machinists and tool-and-die technicians typically reach for this size when drilling large-diameter through holes or stepped bores in ferrous and non-ferrous stock. Coolant-through capability is not available on this model, so surface speeds and feed rates should be managed to control heat buildup during extended cuts.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1-9\/32 inch diameter (1.2813 inch decimal) for large-bore drilling applications\u003c\/li\u003e\n  \u003cli\u003eNo. 4 Morse Taper shank for secure, self-holding fit in compatible spindles\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for wear resistance and corrosion protection\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned geometry reduces entry thrust\u003c\/li\u003e\n  \u003cli\u003eRight-hand regular spiral flute promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eGeneral-purpose tool performance suitable for ferrous and non-ferrous materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in drill press spindles, lathe tailstocks, and milling machine quills fitted with a No. 4 Morse Taper (4MT) socket. Verify spindle taper designation before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and removal should be performed by a qualified machinist or tool operator. Power down and lock out the machine before inserting or removing the taper shank. Clean both the shank and the spindle taper bore with a lint-free cloth to remove oil and chips before seating; contaminants will reduce holding force and can cause runout. Use a drift key and mallet in the spindle drift slot to break the taper loose for removal — never pry against the flutes.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1-9\/32 inches (1.2813 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 4MT (No. 4 Morse Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 7-1\/4 inches (7.25 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 13-1\/8 inches (13.125 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 3.44 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241639\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01541184\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51691371954482,"sku":"01541184","price":185.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/989d3e63316d8c98f9bd6f8307d8d042.jpg?v=1788284016","url":"https:\/\/voomisupply.com\/products\/value-collection-01541184-taper-shank-drill-bit-4mt-hss","provider":"Voomi Supply","version":"1.0","type":"link"}