{"product_id":"value-collection-01520519-taper-shank-drill-bit-51-64-2mt","title":"Value Collection 01520519 Taper Shank Drill Bit 51\/64 2MT","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01520519 is a taper shank drill bit designed for general-purpose drilling in metal, wood, and similar materials. It accepts a No. 2 Morse Taper (2MT) shank, which seats directly into compatible drill press spindles, lathes, and milling machine quills without a separate chuck. The bit is ground from high-speed steel (HSS) with an oxide finish that provides mild corrosion resistance and reduces friction during cutting. Key geometry includes a 118-degree standard point angle and a web-thinned tip that reduces thrust load at the start of each hole. Overall length is 9.625 inches with a flute length of 5.75 inches, making it suitable for moderate-depth through-hole applications.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is intended for use in machine shop environments, maintenance and repair operations, and production drilling setups where a Morse taper spindle is available. The 51\/64-inch diameter (0.7969 inches decimal) is a common size for clearance holes, counterbore pilots, and close-tolerance bore preparation. Right-hand cutting direction and regular spiral flute geometry make it compatible with standard spindle rotation on drill presses, engine lathes, and knee mills. It is a general-purpose tool suited to ferrous and non-ferrous metals, thermoplastics, and wood composites.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e51\/64-inch diameter (0.7969 inches decimal) for precise hole sizing\u003c\/li\u003e\n  \u003cli\u003eNo. 2 Morse Taper shank seats directly in 2MT spindles and sleeves\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned tip to reduce entry thrust\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for general-purpose durability\u003c\/li\u003e\n  \u003cli\u003eRegular spiral, right-hand cutting flutes for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003e5.75-inch flute length supports moderate-depth drilling applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in any machine spindle, sleeve, or socket accepting a No. 2 Morse Taper (2MT) shank, including drill presses, engine lathes, and milling machines configured for 2MT tooling.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by a qualified machinist or trained tradesperson familiar with taper shank tooling. Before inserting or removing the bit, power down the machine and confirm the spindle has come to a complete stop. Clean both the taper shank and the spindle bore of chips and oil before seating to ensure full contact and prevent slippage under load. Use a drift key and a soft mallet against the spindle drift slot to remove the bit safely — do not strike the cutting end of the bit.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 51\/64 inch (0.7969 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Taper Designation\u003c\/strong\u003e: 2MT (No. 2 Morse Taper)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 9.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.87 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241639\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01520519\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51698451185970,"sku":"01520519","price":81.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/24aa68175fc6f2871a7f6d59133f3a46.jpg?v=1788363052","url":"https:\/\/voomisupply.com\/products\/value-collection-01520519-taper-shank-drill-bit-51-64-2mt","provider":"Voomi Supply","version":"1.0","type":"link"}