{"product_id":"value-collection-01378256-cobalt-drill-bit-size-25","title":"Value Collection 01378256 Cobalt Drill Bit Size 25","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01378256 is a cobalt screw machine length drill bit designed for high-speed drilling in hard and abrasive materials. Built to heavy-duty grade standards, it features a 135-degree split point that reduces walking on entry and requires less feed pressure to start the cut. The straight shank and short screw machine length body make it well suited for use in tight clearances and production environments. At 0.1495 inches in diameter, it corresponds to wire gauge size 25 and delivers consistent hole geometry in steel, stainless, cast iron, and similar tough workpiece materials.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is used in metalworking applications across manufacturing, maintenance, and fabrication settings. The screw machine length profile fits standard drill chucks and is commonly run in drill presses, CNC machining centers, and hand-held power drills where a shorter, stiffer bit improves accuracy and reduces deflection. It is suited for production drilling in ferrous metals, heat-treated alloys, and other materials that cause premature wear in standard high-speed steel tooling. Licensed machinists, toolmakers, and maintenance mechanics are the primary users.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction provides elevated heat and wear resistance for drilling hard metals\u003c\/li\u003e\n  \u003cli\u003e135-degree split point reduces drill walking and lowers required feed pressure\u003c\/li\u003e\n  \u003cli\u003eScrew machine length body increases rigidity and reduces deflection in tight setups\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction for standard clockwise drill operation\u003c\/li\u003e\n  \u003cli\u003e2-flute regular spiral flute design promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard screw machine length drill bit in wire gauge size 25, compatible with any drill chuck or collet system that accepts a straight shank at 0.1495 inches nominal diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed by a machinist or maintenance technician in any standard drill chuck capable of accepting a straight shank. Ensure the workpiece is securely clamped before drilling and use appropriate cutting fluid when drilling hard alloys to extend tool life. Inspect the split point for chipping before each use, as a damaged point will affect hole accuracy and can cause bit breakage under feed pressure.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: 25\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.1495 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Straw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01378256\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51710448664882,"sku":"01378256","price":54.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8c09f001090d4185ae71422debd31e43.jpg?v=1788467091","url":"https:\/\/voomisupply.com\/products\/value-collection-01378256-cobalt-drill-bit-size-25","provider":"Voomi Supply","version":"1.0","type":"link"}