{"product_id":"value-collection-01378199-drill-bit-size-19-cobalt-135-deg","title":"Value Collection 01378199 Drill Bit Size 19 Cobalt 135 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 01378199 is a screw machine length drill bit designed for high-speed, short-clearance drilling in metal fabrication, machining, and general mechanical work. Built from cobalt steel with a straw finish, this bit handles harder workpiece materials that would quickly wear down standard HSS tooling. The 135-degree split point self-centers on contact, reducing the need for a center punch and minimizing walking on smooth or curved surfaces. At 2.125 inches overall length, the stubby profile provides rigidity in drill presses and hand drills alike, making it a go-to choice for machinists, tool-and-die workers, and maintenance mechanics.\u003c\/p\u003e\u003cp\u003eThis bit is sized to wire gauge Number 19, with a decimal diameter of 0.1660 inches, placing it in the 0.1500 to 0.2000 inch drill bit size range. It is well suited for drilling clearance and tap holes in stainless steel, hardened alloys, and other tough materials where standard jobber-length bits lack the durability to perform consistently. The straight shank is compatible with standard drill chucks and collet holders used in both bench and floor-standing drill presses.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCobalt steel construction for extended tool life in hard and abrasive materials\u003c\/li\u003e\n\u003cli\u003e135-degree split point for self-centering and reduced thrust on entry\u003c\/li\u003e\n\u003cli\u003eScrew machine length (2.125 inches OAL) for added rigidity and control in tight setups\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction for standard drill press and hand drill use\u003c\/li\u003e\n\u003cli\u003eRegular spiral with 2 flutes for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eStraight shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct addition for standard straight-shank drill chucks accepting bits in the 0.1500 to 0.2000 inch diameter range, including common 3-jaw drill press and hand drill chucks.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use of drill bits should be performed by qualified machinists or mechanics familiar with cutting tool safety. Always power down and de-energize the drill press or driving tool before changing bits. Secure the workpiece firmly before drilling and use appropriate cutting fluid or coolant where required by the material, noting this bit does not support coolant-through operation. Inspect the bit for chips, cracks, or excessive wear before each use and replace if the cutting edges are compromised.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: 19\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.1660 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Straw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.0625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size Range\u003c\/strong\u003e: 0.1500 to 0.2000 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01378199\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51699190268210,"sku":"01378199","price":55.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/79c8819120012dbecc8d467554e41270.jpg?v=1788373319","url":"https:\/\/voomisupply.com\/products\/value-collection-01378199-drill-bit-size-19-cobalt-135-deg","provider":"Voomi Supply","version":"1.0","type":"link"}