{"product_id":"value-collection-01346972-taper-length-drill-1-9688-in-hss","title":"Value Collection 01346972 Taper Length Drill 1.9688 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01346972 is a taper length drill bit designed for production and maintenance drilling where a longer flute than a jobber-length bit is needed without the full reach of a screw-machine length tool. Ground from high-speed steel (HSS) with a black oxide finish, it features a 118-degree standard point angle with web thinning on a tapered web configuration. The 1.9688-inch diameter makes it suitable for large-diameter through-hole work in ferrous and non-ferrous metals. Machinists, tool-and-die tradespeople, and maintenance mechanics are the primary users of this type of tooling.\u003c\/p\u003e\n\u003cp\u003eThis taper length drill bit is used in vertical mills, drill presses, and radial arm drills for applications requiring a longer reach than a standard jobber bit. The 3.0000-inch flute length and 6-inch overall length give it clearance for deeper holes in structural steel, plate, and cast iron. The straight cylindrical shank, ground to 3\/4 inch, accepts standard drill chucks and collet systems sized for that diameter. It is sold individually and suited for both shop floor production runs and field maintenance operations.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1.9688-inch diameter with 118-degree standard point for general-purpose drilling\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tapered web reduces thrust and improves chip clearance on entry\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish provides mild lubricity and corrosion resistance during storage and use\u003c\/li\u003e\n  \u003cli\u003eHSS construction handles ferrous and non-ferrous metals at conventional cutting speeds\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flute with regular helix evacuates chips efficiently in through-hole applications\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank at 3\/4 inch fits standard heavy-duty drill chucks and collet holders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for drill presses, vertical mills, and radial arm drills equipped with a chuck or collet system that accepts a 3\/4-inch straight shank.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use of large-diameter drill bits of this size should be performed by a qualified machinist or maintenance mechanic. Ensure the machine spindle is fully stopped and locked out before mounting or removing the bit from the chuck or collet. Verify chuck capacity and tighten the shank fully before operation to prevent slippage under the high torque loads generated by a 1.9688-inch diameter cut. Cutting fluid appropriate to the workpiece material is strongly recommended to manage heat at this diameter.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1.9688 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.0000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 2.25 inches (2-1\/4 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular Helix\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01346972\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51692522438962,"sku":"01346972","price":410.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/33592ff1ddb9404ee4567fd3f08e7972.jpg?v=1788298853","url":"https:\/\/voomisupply.com\/products\/value-collection-01346972-taper-length-drill-1-9688-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}