{"product_id":"value-collection-01344670-reduced-shank-drill-bit-hss","title":"Value Collection 01344670 Reduced Shank Drill Bit Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01344670 is a reduced shank twist drill bit designed for drilling large-diameter holes using a standard 1\/2 inch drill chuck. The full drill diameter measures 1.2007 inches (30.50 mm), while the shank is reduced to 1\/2 inch to fit common drill presses and hand drills without requiring a larger chuck capacity. Constructed from high-speed steel (HSS) with an oxide finish, this bit handles general-purpose drilling in metals, plastics, and wood. The 118-degree standard point angle suits a wide range of materials and is a common choice for machinists and maintenance technicians working in fabrication or repair environments.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for use on drill presses, milling machines, and hand-held drills where a 1\/2 inch chuck is the maximum available. The reduced shank design makes oversized drilling accessible without specialized tooling. With a 3 inch flute length and 6 inch overall length, it provides adequate reach for typical through-hole and deep-hole applications on plate stock, structural steel, aluminum, and similar workpieces. Right-hand spiral flutes evacuate chips efficiently during drilling. General-purpose tool performance makes it appropriate for job shop, maintenance, and light manufacturing use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced 1\/2 inch shank fits standard drill chucks while cutting a full 1.2007 inch diameter hole\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction provides durability across metals, plastics, and wood\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose material compatibility\u003c\/li\u003e\n  \u003cli\u003eOxide finish reduces friction and provides mild corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eRight-hand spiral flutes with regular helix promote chip evacuation\u003c\/li\u003e\n  \u003cli\u003e6 inch overall length with 3 inch flute length and 3 inch maximum drilling depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose reduced shank drill bit compatible with 1\/2 inch keyed or keyless drill chucks on standard drill presses, benchtop drilling machines, and heavy-duty hand drills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the reduced shank firmly in the chuck and verify there is no runout before beginning the cut. A licensed machinist or experienced technician should set appropriate spindle speed based on workpiece material and bit diameter — large-diameter bits require significantly lower RPM than small-diameter bits. Use a center punch to locate the hole and prevent walking on hard materials. No coolant is specified for this bit; use cutting fluid as appropriate for the workpiece material to extend tool life.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1.2007 inches (30.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant\u003c\/strong\u003e: Not required\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01344670\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51696419143986,"sku":"01344670","price":139.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4ad09141fdc90021ce24aec88b3fd0f6.jpg?v=1788342459","url":"https:\/\/voomisupply.com\/products\/value-collection-01344670-reduced-shank-drill-bit-hss","provider":"Voomi Supply","version":"1.0","type":"link"}