{"product_id":"value-collection-01242304-jobber-drill-bit-2-30mm-hss","title":"Value Collection 01242304 Jobber Drill Bit 2.30mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01242304 is a high speed steel jobber-length drill bit ground to a 2.30 mm (0.0906 inch) diameter with a standard 118-degree point angle. The cutting edges carry an oxide coating that reduces friction and helps extend tool life in general-purpose drilling applications. Overall length is 2.25 inches, with a 1.2656-inch flute length. The straight cylindrical shank seats directly into standard drill chucks without requiring a collet adapter. Right-hand cutting direction follows conventional drill press and hand-drill operation. This bit is suited for machinists, maintenance technicians, and fabricators who need a reliable small-diameter drill for everyday production work.\u003c\/p\u003e\n\u003cp\u003eThis jobber drill is intended for use in steel and cast iron workpieces in general-purpose shop environments. The 118-degree standard point geometry is a widely accepted angle for drilling into ferrous metals and is compatible with both drill presses and hand-held power drills. The two-flute regular spiral design evacuates chips efficiently in through-hole and blind-hole applications. Typical users include machine shops, maintenance and repair operations, and fabrication facilities requiring consistent small-diameter hole tolerances.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for reduced friction and extended service life\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle for general-purpose drilling in steel and cast iron\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned tapered web configuration reduces thrust and improves chip clearance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, two-flute regular spiral design for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eGeneral-purpose grade suitable for production and maintenance drilling tasks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in standard drill presses, CNC drilling operations, and hand-held power drills that accept straight-shank bits. Rated for drilling steel and cast iron workpieces.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or technicians familiar with proper drilling procedures. Secure the workpiece firmly before engaging the bit, and ensure the chuck is fully tightened on the straight shank to prevent slippage. Use appropriate cutting fluid or coolant when drilling ferrous metals to manage heat buildup, as this bit does not support coolant-through delivery. Inspect the cutting edges before each use and replace bits that show signs of chipping or excessive wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.30 mm (0.0906 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches (57.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.2656 inches (32.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0906 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0042 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01242304\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51694771044658,"sku":"01242304","price":27.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8f504a51eba4c969c388dd67db23df38.jpg?v=1788328253","url":"https:\/\/voomisupply.com\/products\/value-collection-01242304-jobber-drill-bit-2-30mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}