{"product_id":"value-collection-01242056-jobber-drill-2-05mm-118deg-hss","title":"Value Collection 01242056 Jobber Drill 2.05mm 118deg Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 01242056 is a high speed steel jobber-length drill bit ground to a 118-degree standard point angle and finished with an oxide coating for basic lubricity and corrosion resistance. It measures 2.05 mm (0.0807 inches) in diameter with an overall length of 2.125 inches and a flute length of 1.1406 inches. The straight cylindrical shank and regular spiral flute geometry make it compatible with standard drill chucks. Web-thinning on the tapered web reduces thrust at entry and helps the bit start cleanly without a center punch on flat stock. Suited for general-purpose drilling in steel and cast iron, this bit is a shop-consumable used by machinists, millwrights, and maintenance technicians.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for general-purpose applications in ferrous materials including steel and cast iron. Its jobber length provides a balance of reach and rigidity that suits bench drilling, drill press work, and hand-held power tool use in typical maintenance and fabrication environments. The 2.05 mm diameter falls within the 2.00 mm to 3.00 mm size range, making it appropriate for small-diameter through-hole and pilot-hole work where precision fit is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2.05 mm (0.0807 inches) diameter with 118-degree standard point angle for general-purpose entry\u003c\/li\u003e\n\u003cli\u003eHigh speed steel (HSS) construction provides hardness and wear resistance suitable for steel and cast iron\u003c\/li\u003e\n\u003cli\u003eOxide coating offers basic lubricity and surface protection\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web reduces cutting thrust and improves centering\u003c\/li\u003e\n\u003cli\u003eRight-hand cut with regular spiral flute for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks without modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in standard drill presses, CNC drilling operations, and hand-held power tools with chucks sized to accept a 0.0807-inch straight shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSecure the shank fully in the drill chuck and verify concentricity before drilling. Ensure the workpiece is clamped or fixtured to prevent rotation or movement during cutting. Use appropriate cutting fluid or coolant when drilling steel to extend bit life and maintain hole quality. Inspect the cutting edges before each use and replace bits showing signs of chipping or dullness to avoid workpiece damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.05 mm (0.0807 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.125 inches (54.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.1406 inches (29.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0807 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01242056\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51689195045170,"sku":"01242056","price":33.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/abc45e45b6eccb32a91f378de9af2fa6.jpg?v=1788255989","url":"https:\/\/voomisupply.com\/products\/value-collection-01242056-jobber-drill-2-05mm-118deg-hss","provider":"Voomi Supply","version":"1.0","type":"link"}