{"product_id":"value-collection-01241652-jobber-drill-bit-1-65mm-hss","title":"Value Collection 01241652 Jobber Drill Bit 1.65mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe VALUE COLLECTION 01241652 is a high speed steel jobber drill bit designed for general-purpose drilling in metal fabrication, maintenance, and light manufacturing environments. Sized at 1.65 mm (0.0650 inches) in diameter with a 118-degree standard point angle, this bit handles steel and cast iron with consistent performance. An oxide finish reduces surface friction and provides modest corrosion resistance. The overall length is 2-1\/64 inches (2.0156 inches), with a flute length of 63\/64 inch (0.9844 inches), making it suitable for shallow to moderate-depth holes in production and repair applications. Licensed machinists, tool-and-die technicians, and maintenance trades are the primary installers.\u003c\/p\u003e\u003cp\u003eThis jobber drill bit is intended for right-hand, clockwise-rotation drilling in steel and cast iron workpieces. Its straight cylindrical shank seats in standard drill chucks and collets across a wide range of benchtop drill presses, CNC drilling centers, and hand-held power drills. The regular spiral flute geometry promotes consistent chip evacuation during through-hole and blind-hole operations. This bit is well suited to general shop work where small-diameter precision holes are required in ferrous materials.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1.65 mm (0.0650 inch) diameter fits the 0.0500 to 0.1000 inch small-diameter drill range\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle for versatile entry into steel and cast iron\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction withstands the heat generated in ferrous drilling\u003c\/li\u003e\n\u003cli\u003eOxide coating reduces friction and provides light surface protection\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web configuration reduces thrust requirements at the cutting tip\u003c\/li\u003e\n\u003cli\u003eTwo-flute regular spiral design promotes steady chip clearance\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank for compatibility with standard chucks and collets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in standard drill chucks and collets sized to accept a 0.0635-inch shank diameter, suitable for ferrous materials including steel and cast iron.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit should be installed by a qualified machinist or maintenance technician familiar with small-diameter tooling. Secure the straight shank firmly in a properly sized chuck or collet before operation, and verify spindle speed is appropriate for the workpiece material and bit diameter. Coolant-through is not supported; use cutting fluid applied externally when drilling steel to extend tool life. Discard the bit if tip chipping or excessive runout is observed, as small-diameter HSS bits are susceptible to breakage under lateral load.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1.65 mm (0.0650 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 63\/64 inch (0.9844 inches \/ 25.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-1\/64 inches (2.0156 inches \/ 51.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0635 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0019 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01241652\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51717402329394,"sku":"01241652","price":38.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/90ed688dcd08fb53639d6eda6ac5f58d.jpg?v=1788539807","url":"https:\/\/voomisupply.com\/products\/value-collection-01241652-jobber-drill-bit-1-65mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}