{"product_id":"value-collection-01241306-jobber-drill-bit-1-30mm-hss","title":"Value Collection 01241306 Jobber Drill Bit 1.30mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01241306 is a high speed steel jobber-length drill bit designed for general-purpose drilling in metal fabrication, maintenance, and light industrial applications. Ground to a standard 118-degree point angle with a web-thinned, tapered web configuration, it reduces the thrust needed to start and penetrate a hole. The 1.30 mm (0.0512 inch) diameter and straight cylindrical shank make it compatible with standard drill chucks. An oxide coating provides light corrosion resistance and helps reduce friction at the cutting edge. The right-hand, regular spiral flute geometry evacuates chips efficiently in typical through-hole and blind-hole operations on steel and cast iron.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for machine shop, production, and field maintenance work where small-diameter precision holes are required. Primary target workpiece materials are steel and cast iron, making it appropriate for fabricators, pipefitters, millwrights, and maintenance technicians working with ferrous stock. The 55\/64-inch flute length and 1-57\/64-inch overall length fit the jobber standard, giving adequate depth capacity for most light-gauge and thin-stock drilling tasks. Sold individually, with a minimum order quantity of 10 units.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1.30 mm (0.0512 inch) diameter with matching straight cylindrical shank diameter of 0.0512 inch\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction for durability on steel and cast iron workpieces\u003c\/li\u003e\n  \u003cli\u003eOxide coating for light corrosion resistance and reduced cutting friction\u003c\/li\u003e\n  \u003cli\u003eRight-hand, regular spiral flute design promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eJobber-length geometry: 55\/64-inch flute length, 1-57\/64-inch overall length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber drill bit for use on steel and cast iron workpieces. Straight cylindrical shank fits standard keyed and keyless drill chucks accepting 0.0512-inch shank diameter bits.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists, fabricators, or maintenance technicians using a drill press, CNC machine, or handheld drill. Secure the shank fully in the chuck and verify concentricity before operation. Use cutting fluid or coolant appropriate for the workpiece material to extend tool life, especially in production drilling. Inspect the cutting edges before each use and replace the bit if chipping or dulling is observed to avoid work-hardening the bore.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1.30 mm (0.0512 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 55\/64 inch (0.8594 inch \/ 22.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1-57\/64 inches (1.8906 inch \/ 48.00 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0512 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.0012 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01241306\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51707713388850,"sku":"01241306","price":29.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c2acccf61779fb7f91c4f2188912fe82.jpg?v=1788441790","url":"https:\/\/voomisupply.com\/products\/value-collection-01241306-jobber-drill-bit-1-30mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}