{"product_id":"value-collection-01190032-cobalt-jobber-drill-3-64-in","title":"Value Collection 01190032 Cobalt Jobber Drill 3\/64 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01190032 is a cobalt jobber-length drill bit designed for demanding drilling applications in hard and abrasive materials. Built to heavy-duty grade, it features a 135-degree split point that reduces walking and requires no center punch on most surfaces. The bit measures 3\/64 inch (0.0469 inch decimal) in diameter with a 1-3\/4 inch overall length and a 3\/4 inch flute length. With a right-hand, regular spiral flute and a straight cylindrical shank, it fits standard drill chucks. The straw finish is characteristic of the cobalt alloy and does not serve as a performance coating. Licensed machinists, pipefitters, and HVAC sheet-metal technicians commonly reach for this size in precision hole-making tasks.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for cutting stainless steel, hardened materials, and other high-strength alloys where high-speed steel (HSS) bits lose their edge prematurely. The 3\/64 inch diameter makes it appropriate for small-diameter pilot holes, rivet holes, and precision sheet-metal work in both residential and commercial trade environments. The two-flute regular spiral design clears chips efficiently in through-hole drilling on thin and medium-thickness stock.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction rated for heavy-duty drilling in stainless steel and hardened materials\u003c\/li\u003e\n  \u003cli\u003e135-degree split point reduces bit walking and eliminates the need for a center punch on most workpieces\u003c\/li\u003e\n  \u003cli\u003eRight-hand, regular spiral flute with efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003e3\/64 inch (0.0469 inch) diameter with 1-3\/4 inch overall length and 3\/4 inch flute length\u003c\/li\u003e\n  \u003cli\u003eNo coolant-through requirement — suitable for standard handheld or bench-drill use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber drill bit compatible with standard straight-shank drill chucks across handheld drills, drill presses, and milling machine collets sized to accept a straight cylindrical shank in the 3\/64 inch diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis bit is installed by licensed machinists, pipefitters, electricians, or sheet-metal tradespeople using standard keyed or keyless drill chucks. Secure the shank fully in the chuck before operation and confirm the chuck is tightened to prevent slipping. When drilling stainless steel or hardened stock, use a slow, consistent feed rate with cutting fluid to extend bit life and prevent work hardening. Inspect the bit for chipping or heat discoloration before each use, and replace if the cutting edges show signs of wear.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 3\/64 inch (0.0469 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Straw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Stainless Steel, Hardened Materials\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01190032\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51715587473714,"sku":"01190032","price":54.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fbb9cf1e4e60639b718ccc489bed5409.jpg?v=1788515999","url":"https:\/\/voomisupply.com\/products\/value-collection-01190032-cobalt-jobber-drill-3-64-in","provider":"Voomi Supply","version":"1.0","type":"link"}