{"product_id":"value-collection-01188697-no-69-hss-jobber-drill-bit","title":"Value Collection 01188697 No 69 Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe VALUE COLLECTION 01188697 is a wire gauge No. 69 jobber-length drill bit designed for general-purpose drilling in steel and cast iron. Built from high speed steel (HSS) with an oxide coating, it features a standard 118-degree point angle and a right-hand spiral flute for consistent chip evacuation. The tapered web with web-thinning reduces thrust and makes starting easier on hard ferrous materials. At 1.375 inches overall length with a 0.500-inch flute length, this bit is sized for tight-clearance applications where a standard jobber reach is required. Machinists, maintenance technicians, and trade professionals install these bits in hand drills, drill presses, and CNC equipment.\u003c\/p\u003e\n\u003cp\u003eThis bit is suited for light metalworking tasks in residential and commercial maintenance, fabrication shops, and field service environments. Its 0.0292-inch decimal diameter corresponds to the No. 69 wire gauge designation, making it a common choice for tapping pilot holes, clearance holes for small fasteners, and precision-fit drilling in thin ferrous stock. The straight cylindrical shank fits standard three-jaw chucks without adapters.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eWire gauge No. 69 size, 0.0292-inch decimal diameter\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced thrust\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for corrosion and wear resistance\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting, regular spiral flute for efficient chip removal\u003c\/li\u003e\n  \u003cli\u003eStraight cylindrical shank compatible with standard three-jaw chucks\u003c\/li\u003e\n  \u003cli\u003eGeneral-purpose grade rated for steel and cast iron workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber drill bit for use in hand drills, benchtop drill presses, and machining centers accepting a straight cylindrical shank. Primary workpiece materials are steel and cast iron per manufacturer specification.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by machinists or maintenance technicians familiar with rotary cutting tools. Secure the shank fully in the chuck and verify concentricity before drilling. Use appropriate cutting fluid or coolant when drilling ferrous materials to extend tool life, noting this bit does not support coolant-through delivery. Inspect the cutting edges for wear before each use and replace bits showing chipping or dulling to maintain hole-size accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire Gauge)\u003c\/strong\u003e: No. 69\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.0292 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.500 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0292 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Cast Iron\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: VALUE COLLECTION\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 01188697\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALUE COLLECTION","offers":[{"title":"Default Title","offer_id":51696458989874,"sku":"01188697","price":40.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c260264225b5def7d97f98342b72b858.jpg?v=1788342895","url":"https:\/\/voomisupply.com\/products\/value-collection-01188697-no-69-hss-jobber-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}